638BA MP3-Compatible AM/FM CD Receiver USER’S MANUAL CONTENTS Installation 2 DIN front-mount installation 3 DIN rear-mount installation 4 Removing the head unit 4 Detaching the front panel 5 Replacing the front panel 5 General controls 6 Radio controls 7 Audio controls 8 CD/MP3 Playback controls 9 How to select MP3 files 10 Controls behind faceplate 10 USB and Front side AUX IN operations 11 Remote control functions 12 How to use bluetooth in your car audio 13-14 Wiring diagram
3309 (638BA _2nd BT) -IM.
Installation 3309 (638BA _2nd BT) -IM.
Before removing the bezel, press the RELEASE button to remove the front panel. press RELEASE to release the front panel... Release Button 3309 (638BA _2nd BT) -IM.
press RELEASE to release the front panel... Release Button 3309 (638BA _2nd BT) -IM.
Front panel controls GENERAL CONTROLS POWER Press any button to turn unit ON. To turn head unit off, press and hold POWER. RELEASE Press to release and remove the front panel. DISP Selects radio frequency or clock display. To set the clock: 1. With clock display selected, hold down (DISP) button until clock display starts flashing. 2. Rotating VOL left to change minutes, VOL right to change hours. 3. Press (DISP) button to start clock 2 sec. AUDIO DSP 2 sec.
RADIO CONTROLS AS/PS Select six strong stations and store them in current band. 1. Select a band (if needed) 2. Hold A/PS button for more than three seconds. The new stations replace stations already stored in that band. Preset Scan Scan stations stored in current band 1. Select a band (if needed) 2. Touch A/PS for more than one second but less than three seconds. Radio pauses for five seconds at each station. Touch A/PS again to stop scanning when desired station is reached.
Front panel controls AUDIO CONTROLS SUBWOOFER Press this button to engage subwoofer output SOURCE By pressing this key, user can select AUX/TUNER/CD-MP3/ USB mode. AUDIO BUTTON and ROTARY CONTROL Press the button repeatedly to access Volume, Bass, Treble, Balance and Fader functions. Then use the knob to adjust the selected function. DSP MODE When press AUDIO button for more than 2 seconds, it is activated as selecting mode of these function. 2 sec.
l 2 sec. AUDIO DSP AUDIO LOUD VOL 2 sec. AUDIO DSP AUDIO LOUD AUDIO WOOF 2 sec. AUDIO DSP AUDIO LOUD AUDIO WOOF AUDIO ESP WOOF AUDIO ESP LOUD ON/OFF CD/MP3 2 sec. PLAYBACK CONTROLS AUDIO MULT DSP VOL LOUD AUDIO AUDIO MULT ON/OFF 2 sec. EJECT Press AUDIO to eject LOUD CD DSP AUDIO AUDIO WOOF 2 sec. AUDIO DSP AUDIO AUDIO BEEP 2 sec. AUDIO DSP AUDIO BEEP 2 sec.
How to select MP3 files Searching Track: • Press and hold “AS/PS”, then search track is activated. First digit will flash. • Rotate “VOL knob to right or left”, select first digit desired. • Press��������������������������������������������������������������������������� “AUDIO” �������������������������������������������������������������������������� button, then the first digit is fixed and second digit will flash.
USB and front side AUX IN operations USB Port Enhanced control of connected Portable Media such as Flash Drives and digital MP3 Players, by using function keys on the main unit or the remote control unit. This unit features the latest ID3 Tag support, which allows you to see the song’s name and which folder it’s located in, on the LCD display. 2 sec. AUDIO DSP 2 sec. AUDIO DSP AUDIO LOUD VOL 2 sec.
Remote controls functions 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21.
How to use bluetooth in your car audio HOW TO PERFORM PAIRING Before you can dial out from the car stereo, you must first perform PAIRING. Pairing is a procedure used to connect 2 Bluetooth devices together. 1. Press and hold AUDIO button for 2 seconds. 2. Press AUDIO button repeatedly until “PAIRING” displays. 3. Press and hold AUDIO button to engage paring mode. “PAIRING” blinks on the display. 4. Turn on the Bluetooth feature of your mobile phone. Perform “Add Bluetooth device” from your mobile phone.
Adding Contacts The unit can save contact telephone number for quick access. 1. Press PHONE then press and hold AUDIO button for 2 seconds. 2. Press AUDIO button repeatedly until “ADD NUM” displays. 3. Press and hold AUDIO button again. 4. Using volume knob, enter the name of the contact. Press AUDIO to save each character entered. Press and hold AUDIO to save name. 5. Enter the phone number. Press AUDIO to save each number entered. 6. Press and hold AUDIO to save entry.
Wiring diagram L (WHITE) R (RED) ANTENNA CONNECTOR L (WHITE) R (RED) SUB WOOFER L (WHITE) R (RED) LINE OUT (FRONT) ISO CONNECTOR LINE OUT (REAR) B LINE IN A DIAL KEYPAD ANTENNA CONTROL BLUE/WHITE AMP TURN ON BLUE YELLOW CONSTANT 12 VOLTS FRONT LEFT SPEAKER REAR LEFT SPEAKER ISO A/B PLUG + WHITE – WHITE/BLACK + GREEN – GREEN/BLACK BLACK GROUND (–) RED IGNITION SWITCH (12 V) GREY + GREY/BLACK – VIOLET + VIOLET/BLACK – FRONT RIGHT SPEAKER REAR RIGHT SPEAKER Auxiliary input feature This CD Re
3309 (638BA _2nd BT) -IM.
Specifications 638BA MP3-Compatible AM/FM CD Receiver CD/MP3 PLAYER Signal to Noise Ratio Channel Separation Frequency Response > 60dB > 45 dB 20Hz - 20 kHz RADIO FM Section: Frequency range Intermediate frequency Sensitivity Stereo separation Signal to noise ratio Channel step 87.5-107.9 MHz 10.
