Datasheet

Detailed Eect Settings
8
FLANGER
The anging eect gives a twisting, jet-airplane-like character to the
sound.
Parameter/Range Explanation
RATE
0–100 This sets the rate of the anging eect.
DEPTH
0–100 Determines the depth of the anging eect.
MANUAL
0–100
Adjusts the center frequency at which to apply the
eect.
RESONANCE
0–100
Determines the amount of resonance (feedback).
Increasing the value will emphasize the eect,
creating a more unusual sound.
SEPARATION
0–100
Adjusts the diusion. The diusion increases as the
value increases.
E.LEVEL (Eect Level)
0–100 Adjusts the volume of the anger.
D.LEVEL (Direct Level)
0–100 Adjusts the volume of the direct sound.
TREMOLO
Tremolo is an eect that creates a cyclic change in volume.
Parameter/Range Explanation
WAVE SHAPE
0–100
Adjusts changes in volume level.
A higher value will steepen wave’s shape.
RATE
0–100 Adjusts the frequency (speed) of the change.
DEPTH
0–100 Adjusts the depth of the eect.
ROTARY
This produces an eect like the sound of a rotary speaker.
Parameter/Range Explanation
SPEED SEL (Speed Select)
SLOW, FAST
This parameter changes the simulated speaker’s
rotating speed (SLOW or FAST).
RATE-SLOW
0–100
This parameter adjusts the SPEED SEL of rotation
when set to “SLOW.”
RATE-FAST
0–100
This parameter adjusts the SPEED SEL of rotation
when set to “FAST.”
RISE TIME
0–100
This parameter adjusts the time it takes for the
rotation SPEED SEL to change when switched from
“SLOW” to “FAST.”
FALL TIME
0–100
This parameter adjusts the time it takes for the
rotation SPEED SEL to change when switched from
“FAST” to “SLOW.”
DEPTH
0–100
This parameter adjusts the amount of depth in the
rotary eect.
UNI-V (Uni-Vibe)
This models a Uni-Vibe.
Although this resembles a phaser eect, it also provides a unique
undulation that you can’t get with a regular phaser.
Parameter/Range Explanation
RATE
0–100 Adjusts the rate of the UNI-V eect.
DEPTH
0–100 Adjusts the depth of the UNI-V eect.
LEVEL
0–100 Adjusts the volume.
PAN
With the volume level of the left and right sides alternately changing,
when playing sound in stereo, you can get an eect that makes the guitar
sound appear to y back and forth between the speakers.
Parameter/Range Explanation
WAVE SHAPE
0–100
Adjusts changes in volume level.
A higher value will steepen wave’s shape.
RATE
0–100 Adjusts the frequency (speed) of the change.
DEPTH
0–100 Adjusts the depth of the eect.
CHORUS
In this eect, a slightly detuned sound is added to the original sound to
add depth and breadth.
Parameter/Range Explanation
MODE
Selection for the chorus mode.
MONO
This chorus eect outputs the same sound from both
L channel and R channel.
STEREO
This is a stereo chorus eect that adds dierent chorus
sounds to L channel and R channel.
RATE
0–100 Adjusts the rate of the chorus eect.
DEPTH
0–100
Adjusts the depth of the chorus eect.
To use it for doubling eect, set the value to 0.
PRE DELAY
0.0ms–40.0ms
Adjusts the time needed for the eect sound to be
output after the direct sound has been output.
By setting a longer pre delay time, you can obtain an
eect that sounds like more than one sound is being
played at the same time (doubling eect).
E.LEVEL (Eect Level)
0–100 Adjusts the volume of the eect sound.