Datasheet

Detailed Eect Settings
6
Parameter/Range Explanation
MIC TYPE
This setting selects the simulated microphone type.
DYN57
This is the sound of the SHURE SM-57.
General dynamic microphone used for instruments
and vocals. Optimal for use in miking guitar amps.
DYN421
This is the sound of the SENNHEISER MD-421.
Dynamic microphone with extended low end.
CND451
This is the sound of the AKG C451B.
Small condenser microphone for use with instru-
ments.
CND87
This is the sound of the NEUMANN U87.
Condenser microphone with at response.
FLAT
Simulates a microphone with perfectly at response.
Produces a sonic image close to that of listening to
the sound directly from the speakers (on site).
MIC DIS (Mic Distance)
Simulates the distance between the microphone and speaker.
OFF MIC
This setting points the microphone away from the
speaker.
ON MIC
Provides conditions whereby the microphone is
directed more towards the speaker.
MIC POS (Mic Position)
This simulates the microphone position.
CENTER
Simulates the condition that the microphone is set in
the middle of the speaker cone.
1–10
Simulates the condition that the microphone is
moved away from the center of the speaker cone.
MIC LEV (Mic Level)
0–100 Adjusts the volume of the microphone.
D.LEVEL (Direct Level)
0–100 Adjusts the volume of the direct sound.
EQUALIZER
This adjusts the tone as a equalizer. A parametric type is adopted for the
high-middle and low-middle range.
Parameter/Range Explanation
ON/OFF
OFF, ON Turns the EQUALIZER eect on/o.
LOW CUT (Low Cut Filter)
FLAT,
55Hz–800Hz
This sets the frequency at which the low cut lter
begins to take eect.
When “FLAT” is selected, the low cut lter will have
no eect.
LOW GAIN
-20–+20dB Adjusts the low frequency range tone.
LOW-MID F (Low Middle Frequency)
20.0Hz–10.0kHz
Species the center of the frequency range that will
be adjusted by the LO-MID G.
LOW-MID Q (Low Middle Q)
0.5–16
Adjusts the width of the area aected by the EQ
centered at the LO-MID F.
Higher values will narrow the area.
LOW-MID G (Low Middle Gain)
-20–+20dB Adjusts the low-middle frequency range tone.
HI-MID F (High Middle Frequency)
20.0Hz–10.0kHz
Species the center of the frequency range that will
be adjusted by the HI-MID G.
HI-MID Q (High Middle Q)
0.5–16
Adjusts the width of the area aected by the EQ
centered at the HI-MID F.
Higher values will narrow the area.
HI-MID G (High Middle Gain)
-20–+20dB Adjusts the high-middle frequency range tone.
HIGH GAIN
-20–+20dB Adjusts the high frequency range tone.
HIGH CUT (High Cut Filter)
700Hz–11.0kHz, FLAT
This sets the frequency at which the high cut lter
begins to take eect. When “FLAT” is selected, the high
cut lter will have no eect.
LEVEL
-20–+20dB Adjusts the overall volume level of the equalizer.