Technical data
Product Specification
HIF-2121/R5 CAGE CODE: 97896 SCALE: NONE SIZE: A DWG NO: 965-1176-601 REV: D SHEET 39
The configuration module is listed in section 1.3.5.2 and is installed on the connector as shown in Figure 3.6.2.1-2.
FIGURE 3.6.2.1-2: CONFIGURATION MODULE (SHOWN AS INSTALLED)
3.6.2.2 Front Panel Test Connector
A test connector is provided on the EGPWC front panel. This provides access for a PC test monitor and future portable data
loading capabilities. Reference section 6.10.4 for pin-out and functional details. The mating connector for the EGPWC test
plug is a male (pins) 15 pin double density D-subminiature type, Positronics Industries (kit) part number ODD15M1OYOZ or
the following individual parts:
Nomenclature (AMP) Amp Part Number Military Part Number
Connector Shell (HDP-22 Crimp Snap In Contact) 748364-1 reference MIL-C-24308
Size 22 DM Crimp Snap In Contacts Pin ΓΈ.030 204370-2 M39029/58-360
Backshell (Shielded Cable Clamp Assembly) 745854-5
Jackscrews (4-40 Male Jackscrew Kit) 747784-8 (specify quantity of 2 per
connector)
Grommet Sets 747746-1
The following tools will work with Positronics, Amp, and Mil Spec Connectors:
Insertion / Extraction Tool 91067-1 M81969/1-04
Hand Crimp Tool M22520/2-01
Positioner M22520/2-09
3.6.3 Mounting
Vibration isolation or shock mounting is not required.
3.6.4 Cooling
Cooling shall be per ARINC 404A convection cooling. No forced air-cooling is required for specified system performance
over the environmental conditions specified in paragraph 3.2 of this document.
3.6.5 Weight
The maximum weight of the 965-1176-xxx MKVI EGPWC is 3.4 pounds.
The maximum weight of the 965-1186-xxx MKVI EGPWC with internal GPS is 3.5 pounds.
The maximum weight of the 965-1206-xxx MKVIII EGPWC is 3.4 pounds.
The maximum weight of the 965-1216-xxx MKVIII EGPWC with internal GPS is 3.5 pounds.