Technical data

Product Specification
HIF-2121/R5 CAGE CODE: 97896 SCALE: NONE SIZE: A DWG NO: 965-1176-601 REV: D SHEET 137
6.10.13.2 INOP History Output Format
INOP history is described in detail in section 6.10.3.2.2
When requested, the EGPWS will output INOP history information in the following order and format:
“INOP HISTORY:”
“FLIGHT LEG” <the most recent leg number with an INOP>
<INOP Event 1> <Operating Time>
“GPWS COMPUTER FAULTS:” (if any exist),
Internal Fault 1
Internal Fault 2 (etc.)
“GPWS EXTERNAL FAULTS:” (if any exist),
External Fault 1
External Fault 2 (etc.)
<INOP Event 2> <Operating Time>
“GPWS COMPUTER FAULTS:” (if any exist),
Internal Fault 1
Internal Fault 2 (etc.)
“GPWS EXTERNAL FAULTS:” (if any exist),
External Fault 1
External Fault 2 (etc.)
etc.
“FLIGHT LEG” <the next most recent leg number with an INOP>
<INOP Event 1> <Operating Time>
“GPWS COMPUTER FAULTS:” (if any exist),
Internal Fault 1
Internal Fault 2 (etc.)
“GPWS EXTERNAL FAULTS:” (if any exist),
External Fault 1
External Fault 2 (etc.)
etc.
If no INOP’s are present in any of the recorded flight legs, the EGPWS will output “NO INOPS” on the line immediately
following “INOP HISTORY:” and that will be the entire INOP history output.
The INOP event will be one of the identifiers listed in Table 6.10.3.2.2.T10.