Technical data

Product Specification
HIF-2121/R5 CAGE CODE: 97896 SCALE: NONE SIZE: A DWG NO: 965-1176-601 REV: D SHEET 135
6.10.13 Flight History Output Formats
When requested via the RS-232 commands (see section 6.10.9) the EGPWS will output the recorded flight history to the
terminal screen. The format of the history outputs is described in the following sections. The standard requirements of RS-
232 output (i.e. page breaks, etc.) still apply to these formats.
For all history displays except fault history, an <operating time> is displayed for each event. This operating time is the same
as recorded in the cumulative counters of section 6.10.3.2.1 and represents the amount of time that that EGPWC has been
powered up since manufacture. Therefore the operating time does not indicate the actual date or time that the event occurred.
For fault history, a <Timestamp> is displayed for each event indicating the time it occurred (if that data is provided) and will
be in standard time format of hours, minutes, and seconds. If time is not available, then the timestamp will be output as “Not
Available”.
NOTE: For the history output formats, words shown in quotation marks (i.e. “FAULT HISTORY: “) are the exact phrases
that will printed on the PC screen, without the quotation marks. Items in the “<“ and “>“ symbols are data items
which will be determined by the EGPWS and output to the PC screen.