ORDER NO.MD0605168C2 DVD Home Theater Sound System SA-HT340E SA-HT340EB SA-HT340EG Colour (S).......................
SA-HT340E / SA-HT340EB / SA-HT340EG (7) +R DL [Video] Terminal (8) CD, CD-R/RW [CD-DA, Video CD, SVCD(*1), MP3(*2,7), WMA(*3,7), JPEG(*4,7), MPEG4(*5,7), DivX (*6,7), HighMAT Level 2 (Audio and Image)] Scart jack (1 system) RGB video output: *1 Conforming to IEC62107 *2 MPEG-1 Layer 3, MPEG-2 Layer 3 *3 Windows Media Audio Ver.9.0 L3 R output level: 0.7 Vp-p (75 Ω) G output level: 0.7 Vp-p (75 Ω) B output level: 0.
SA-HT340E / SA-HT340EB / SA-HT340EG 3
SA-HT340E / SA-HT340EB / SA-HT340EG CONTENTS Page 1 Safety Precautions Page 11 Assembly and disassembly of Mechanism Unit 5 35 1.1. GENERAL GUIDELINES 5 11.1. Disassembly Procedure 35 1.2. Before Repair and Adjustment (Using SMPS) 5 12 Measurements and Adjustments 41 1.3. Protection Circuitry 5 12.1. Service Tools and Equipment 41 1.4. Caution for AC Cord 6 12.2. Important points in adjustment 41 12.3. Storing and handling of test discs 41 12.4.
SA-HT340E / SA-HT340EB / SA-HT340EG 1 Safety Precautions 1.1. GENERAL GUIDELINES 1. When servicing, observe the original lead dress. If a short circuit is found, replace all parts which have been overheated or damaged by the short circuit. 2. After servicing, see to it that all the protective devices such as insulation barriers, insulation papers shields are properly installed. 3. After servicing, carry out the following leakage current checks to prevent the customer from being exposed to shock hazards.
SA-HT340E / SA-HT340EB / SA-HT340EG If this occurs, follow the procedure outlines below: 1. Turn off the power. 2. Determine the cause of the problem and correct it. 3. Turn on the power once again after one minute. Note: When the protection circuitry functions, the unit will not operate unless the power is first turned off and then on again. 1.4.
SA-HT340E / SA-HT340EB / SA-HT340EG 2 Prevention of Electro Static Discharge (ESD) to Electrostatically Sensitive (ES) Devices Some semiconductor (solid state) devices can be damaged easily by static electricity. Such components commonly are called Electrostatically Sensitive (ES) Devices. Examples of typical ES devices are integrated circuits and some field-effect transistors and semiconductor "chip" components.
SA-HT340E / SA-HT340EB / SA-HT340EG 3 Precaution of Laser Diode 8
SA-HT340E / SA-HT340EB / SA-HT340EG 4 About Lead Free Solder (PbF) 4.1. Service caution based on legal restrictions 4.1.1. General description about Lead Free Solder (PbF) The lead free solder has been used in the mounting process of all electrical components on the printed circuit boards used for this equipment in considering the globally environmental conservation. The normal solder is the alloy of tin (Sn) and lead (Pb).
SA-HT340E / SA-HT340EB / SA-HT340EG 5 Handling Precautions for Traverse Unit The laser diode in the optical pickup unit may break down due to static electricity of clothes or human body. Special care must be taken avoid caution to electrostatic breakdown when servicing and handling the laser diode. 5.1. Cautions to Be Taken in Handling the Optical Pickup Unit The laser diode in the optical pickup unit may be damaged due to electrostatic discharge generating from clothes or human body.
SA-HT340E / SA-HT340EB / SA-HT340EG 11
SA-HT340E / SA-HT340EB / SA-HT340EG 6 Accessories Remote control AC cord (For EB area) AM loop antenna AC cord (For E, EG areas) FM indoor antenna Video cable (For E, EG areas) Din adaptor (For EB area) Speaker label 12
SA-HT340E / SA-HT340EB / SA-HT340EG 7 Operation Procedures 7.1.
SA-HT340E / SA-HT340EB / SA-HT340EG 7.2.
SA-HT340E / SA-HT340EB / SA-HT340EG 7.3. Connection Setup 7.3.1. Audio Connection for VCR/TV 7.3.2.
SA-HT340E / SA-HT340EB / SA-HT340EG 7.4. 7.4.1.
SA-HT340E / SA-HT340EB / SA-HT340EG 7.4.2. File Extension Type Support (WMA/MP3/JPEG/MPEG4/DivX) Tips for making data discs When there are more than eight groups, the eighth group onwards will be displayed on one vertical line in the menu screen. There may be differences in the display order on the menu screen and computer sc reen. This unit cannot play files recorded using packet write. DVD-RAM Discs must conform to UDF 2.0. DVD-R/RW Discs must conform to UDF bridge (UDF 1.02/ISO9660).
SA-HT340E / SA-HT340EB / SA-HT340EG 7.5. About DivX VOD Content About DivX VOD content DivX Video-on-Demand (VOD) content is encrypted for copyright protection. In order to play DivX VOD content on this unit, you first need to register the unit. If you purchase DivX VOD content using a registration code different from this unit’s code, you will not be able to play this content. (“Authorization Error” is displayed.
SA-HT340E / SA-HT340EB / SA-HT340EG 8 Self-Diagnosis and special mode setting 8.1. Service Mode Summary Table The service modes can be activated by pressing various button combination on the player and remote control unit. Below is the summary of major checking: Player buttons STOP Remote control unit buttons 0 5 6 7 8 ENTER FUNCTIONS 3 PAUSE 8.2. Application Error code display Note (Refer to the section, “8.3 DVD Self Diagnostic Function-Error Code”). (Refer to the section “8.
SA-HT340E / SA-HT340EB / SA-HT340EG Item Mode Name Jitter check Error code check Key Operation FL Display Description Jitter check Jitter rate is measured and displayed. Measurement is repeatedly done in the cycle of one second. Read error counter starts from zero upon mode setting. When target block data failed to be read out, the counter advances by one increment. When the failure is caused by minor error, it may be corrected when retried to enable successful reading.
SA-HT340E / SA-HT340EB / SA-HT340EG Item Mode Name Micro-processor firmware version display & EEPROM checksum display. Key Operation Front Key FL Display Description Micro-processor firmware version display & EEPROM checksum display. EEPROM checksum is only available due to existence of EEPROM IC. (NO: NO EEPROM IC) If EEPROM IC is present, the checksum value will be displayed. It displays as "NG" if the EEPROM IC installed is not working properly.
SA-HT340E / SA-HT340EB / SA-HT340EG Item Mode Name Timer 1 check Shown to the left is DVD laser time, and to the right is CD laser time. Time is shown in 4 digits of decimal notation in a unit of 10 hours. "0000" will follow "9999". Timer 1 reset Laser operation timer of both DVD laser and CD laser is reset all at once. Shown to the left is DVD laser time, and to the right is CD laser time. It will clear to "0000" upon reset.
SA-HT340E / SA-HT340EB / SA-HT340EG 23
SA-HT340E / SA-HT340EB / SA-HT340EG 8.3. Error Code U11 DVD Self Diagnostic Function-Error Code Diagnosis Contents Description of error Automatic FL Display Remarks Focus servo error Focus coil NG (OPU unit abnormal) Press [ n STOP] on main unit for next error.
SA-HT340E / SA-HT340EB / SA-HT340EG Error Code F600 Diagnosis Contents Description of error Automatic FL Display Remarks Access failure to management information caused by demodulation error Operation stopped because navigation data is not accessible caused by the demodulation defect Press [ n STOP] on main unit for next error F601 Indeterminate sector ID requested Operation stopped caused by the request to access abnormal ID data Press [ n STOP] on main unit for next error F602 Access failure
SA-HT340E / SA-HT340EB / SA-HT340EG Error Code F893 Diagnosis Contents Description of error Automatic FL Display Remarks FLASH ROM IC problem FLASH ROM IC installed is not operating properly (Neccessary replacement of FLASH ROM IC) or firmware problem Press [ n STOP] on main unit for next error F894 EEPROM abnormality EEPROM IC installed is not operating in normal condition (EEPROM contains neccessary data) Press [ n STOP] on main unit for next error F895 Region setting abnormality Firm versio
SA-HT340E / SA-HT340EB / SA-HT340EG power cable from power outlet does not cancel the lock.) 8.5. Service Precautions 8.5.1. Recovery after the DVD player is repaired · When the IC or HDMI module P.C.B. is replaced, carry out the recovery processing to optimize the drive. Playback the recovery disk to process the recovery automatically. · Recovery disc (Product number: RFKZD03R005) · Performing recovery process 1. Load the recovery disc RFKZD03R005 [SPC] on to the player and run it. 2.
SA-HT340E / SA-HT340EB / SA-HT340EG 9 Assembling and Disassembling “ATTENTION SERVICER” Be careful when disassembling and servicing. Some chassis components may have sharp edges. Special Note: 1. This section describes the disassembly procedures for all the major printed circuit boards and main components. 2. Before the disassembly process was carried out, do take special note that all safety precautions are to be carried out. (Ensure that no AC power supply is connected during disassembling.) 3.
SA-HT340E / SA-HT340EB / SA-HT340EG 9.1. Disassembly Flow Chart 9.2. Main Components and P.C.B.
SA-HT340E / SA-HT340EB / SA-HT340EG 9.3. Disassembly of Top Cabinet Step 1 Remove 4 screws. Step 2 Remove 3 screws. (Rear view) Step 3 Lift up and remove the top cabinet. 9.4. Disassembly of the DVD Lid (When taking out disc manually) Step 1 Detach the gear for drawing out tray from the mechanism unit. Inserts a screw driver into the gear. (The gear jig) Step 2 Insert the gear jig into the tray open/ close hole. Step 3 Turn the gear jig counterclockwise to open the tray.
SA-HT340E / SA-HT340EB / SA-HT340EG 9.5. Disassembly of Front Panel Assembly · Follow (Step 1) to (Step 3) of Item 9.3. Step 1 Remove the DVD lid. Step 2 Detach FFC cables at connectors. (CN2005 & CN2007) Step 5 Detach the front panel assembly. Step 3 Remove 1 screw. Special Note: Avoid placing the set in a position that might cause damage to the jacks when removing the front panel assembly. 9.6. Disassembly of FL P.C.B. & Volume P.C.B. · Follow the (Step 1) to (Step 5) of Item 9.
SA-HT340E / SA-HT340EB / SA-HT340EG · Disassembly of Volume P.C.B. Step 6 Remove the volume knob. 9.8. Disassembly of DVD Module P.C.B. · Follow (Step 1) to (Step 3) of Item 9.7. Step 1 Remove 4 screws. Step 2 Detach FFC cables at the connectors.(FP8251, FP8531) Step 7 Remove 4 screws. Step 8 Remove Volume P.C.B. 9.7. Disassembly of DVD Mechanism Unit Caution: Do not apply or exert excessive force when detaching the FFC cables. · Follow (Step 1) to (Step 3) of Item 9.3. · Follow (Step 1) of Item 9.
SA-HT340E / SA-HT340EB / SA-HT340EG 9.9. Disassembly of Rear panel 9.11. · Follow (Step 1) to (Step 3) of Item 9.3. Step 1 Remove 8 screws. Disassembly of Main P.C.B. & Tuner Extent P.C.B. · Follow (Step 1) to (Step 3) of Item 9.3. Step 2 Detach connector (CN5704) at fan unit. · Follow (Step 1) of Item 9.5 for disassembly of DVD lid. Caution: Remember to attach the connector of fan unit during assembly. · Follow (Step 1) to (Step 3) of Item 9.7. · Follow (Step 1) to (Step 4) of Item 9.9.
SA-HT340E / SA-HT340EB / SA-HT340EG 10 Service Position 10.1. Servicing position of the DVD Module P.C.B. · Follow Item 9.7. · Follow (Step 1) of Item 9.8. · Follow (Step 1) of Item 9.9. Step 1 Connect FFC cables at connectors. (CN2, CN3, CN2001, CN2005 & CN2007) Step 2 Connect fan unit (CN5704). Step 3 Turn mechanism unit to vertical position. 10.3. Servicing position of the SMPS Module P.C.B. · Follow Item 9.7. · Follow Item 9.10. · Follow Item 9.11. Step 1 Connect FFC cables at connectors.
SA-HT340E / SA-HT340EB / SA-HT340EG 11 Assembly and disassembly of Mechanism Unit Step 4 Remove the traverse unit. 11.1. Disassembly Procedure 11.1.2. Disassembly of Tray Unit Step 1 Slide the guide tray unit while pressing the stopper in the arrow direction, and remove the guide tray unit. 11.1.1. Disassembly of Traverse Unit Step 1 Slide the lever (A) in the arrow direction (to the opposite side) till it stops.
SA-HT340E / SA-HT340EB / SA-HT340EG Step 3 Hook the drive arm concave phase over the tray and the tray slider. Step 4 Spread the tabs at the both sides and pull the tray out. (The tray slides a little forword and stops.). Step 4 Press in the tray. Step 5 Make sure that the tray and the drive arm move smoothly. Step 5 Remove the drive arm concave phase from the tray slider and tray. 11.1.3. Disassembly of Loading section Step 1 Spread the tabs at the both sides and push out the drive arm shaft.
SA-HT340E / SA-HT340EB / SA-HT340EG Step 7 Turn the change lever in the arrow direction till it stops. Step 8 Hook the change lever spring on the change lever project part temporarily. Step 2 Hook the lock lever spring on the lock lever projection part temporarly. Step 3 Unlock the tab and remove the lock lever. Step 9 Pull the lever (B) in the bottom side to your side and remove the change lever. Step 4 Remove the belt. Step 5 Unlock the tab and remove the pulley. Step 6 Remove the relay gear.
SA-HT340E / SA-HT340EB / SA-HT340EG 11.1.4. Disassembly of Tray Loading P.C.B. Step 1 Remove 3 screws Step 2 Remove 4 pins. 11.1.5. Disassembly of Optical Pickup Unit Special Note: Anti-static measures are necessary due to handling of OPU unit . Step 3 Remove the middle chassis. Step 1 Spread the tabs to push in the pin.
SA-HT340E / SA-HT340EB / SA-HT340EG Step 7 Remove 1 screw. Step 8 Slide the shaft in the arrow direction. Step 4 Remove the optical pickup unit in the arrow direction till it stops. Step 9 Lift the optical pickup unit with the shaft. Step 5 Remove 2 screws. Step 10 Remove the optical pickup unit. Step 6 Remove the drive rack.
SA-HT340E / SA-HT340EB / SA-HT340EG (Assembling the optical pickup unit) Step 1 Pass the intermediate FPC through the frame hole. Step 2 Align the guide section of the optical pickup unit with the rail. Step 3 Install the shaft top to the holder. Step 11 Pull the shaft and the rubber out.
SA-HT340E / SA-HT340EB / SA-HT340EG 12 Measurements and Adjustments 12.1. Service Tools and Equipment Application Tilt adjustment Name Number DVDT-S20 [SPG] DVD test disc TORX screw driver (T6) Others Confirmation Available on sales route. (T6) or RFKZ0185 [SPG] RFKXPG641 [SPG] PVCD-K06 or any other commercially available disc PVCD-K06 or any other commercially available disc RFKZD03R005 [SPG] Grease CD test disc VCD test disc Recovery disc 12.2. Important points in adjustment 12.2.1.
SA-HT340E / SA-HT340EB / SA-HT340EG 12.4. Optical adjustment 12.4.1. Optical pickup tilt adjustment Measurement point Adjustment point Tangential adjustment screw Tilt adjustment screw Measuring equipment None (Main unit display for servicing is used.) Mode Disc T01 (inner periphery) play DVDT-S20 [SPG] T30 (center periphery) T43 (outer periphery) play Adjustment value Adjust to the minimum jitter value. 12.4.1.1. Adjustment procedure 1.
SA-HT340E / SA-HT340EB / SA-HT340EG INITIAL/LOGO E EC ECR 13 Abbreviations INITIAL/LOGO A A0~UP ACLK AD0~UP ADATA ALE AMUTE AREQ ARF ASI ASO ASYNC B BCK BCKIN BDO BLKCK BOTTOM BYP BYTCK C CAV CBDO CD CDSCK CDSRDATA CDRF CDV CHNDATA CKSL CLV COFTR CPA CPCS CPDT CPUADR CPUADT CPUIRQ CPRD CPWR CS CSYNCIN CSYNCOUT D DACCK DEEMP DEMPH DIG0~UP DIN DMSRCK DMUTE DO DOUT0~UP DRF DRPOUT DREQ DRESP DSC DSLF DVD ABBREVIATIONS ADDRESS AUDIO CLOCK ADDRESS BUS AUDIO PES PACKET DATA ADDRESS LATCH ENABLE AUDIO MUTE AUDIO
SA-HT340E / SA-HT340EB / SA-HT340EG INITIAL/LOGO R RE RFENV RFO RS RSEL RST RSV S SBI0, 1 SBO0 SBT0, 1 SCK SCKR SCL SCLK SDA SEG0~UP SELCLK SEN SIN1, 2 SOUT1, 2 SPDI SPDO SPEN SPRCLK SPWCLK SQCK SQCX SRDATA SRMADR SRMDT0~7 SS STAT STCLK STD0~UP STENABLE STSEL STVALID SUBC SBCK SUBQ SYSCLK T TE TIBAL TID TIN TIP TIS TPSN TPSO TPSP TRCRS TRON TRSON ABBREVIATIONS READ ENABLE RF ENVELOPE RF PHASE DIFFERENCE OUTPUT (CD-ROM) REGISTER SELECT RF POLARITY SELECT RESET RESERVE SERIAL DATA INPUT SERIAL DATA OUTPUT S
SA-HT340E / SA-HT340EB / SA-HT340EG 14 Voltage and Waveform Chart 14.1. DVD Module P.C.B. Re f No. MODE CD P LAY Re f No. MODE CD P LAY Re f No. MODE CD P LAY Re f No. MODE CD P LAY Re f No. MODE CD P LAY Re f No. MODE CD P LAY Re f No. MODE CD P LAY Re f No. MODE CD P LAY Re f No. MODE CD P LAY Re f No. MODE CD P LAY Re f No. MODE CD P LAY Re f No. MODE CD P LAY Re f No. MODE CD P LAY Re f No. MODE CD P LAY Re f No. MODE CD P LAY Re f No. MODE CD P LAY Re f No. MODE CD P LAY Re f No.
SA-HT340E / SA-HT340EB / SA-HT340EG 14.2. Main P.C.B. Re f No. MODE CD P LAY S TANDBY Re f No. MODE CD P LAY S TANDBY Re f No. MODE CD P LAY S TANDBY Re f No. MODE CD P LAY S TANDBY Re f No. MODE CD P LAY S TANDBY Re f No. MODE CD P LAY S TANDBY Re f No. MODE CD P LAY S TANDBY Re f No. MODE CD P LAY S TANDBY Re f No. MODE CD P LAY S TANDBY Re f No. MODE CD P LAY S TANDBY Re f No. MODE CD P LAY S TANDBY Re f No. MODE CD P LAY S TANDBY Re f No. MODE CD P LAY S TANDBY Re f No. MODE CD P LAY S TANDBY Re f No.
SA-HT340E / SA-HT340EB / SA-HT340EG Re f No. MODE CD P LAY S TANDBY Re f No. MODE CD P LAY S TANDBY Re f No. MODE CD P LAY S TANDBY Re f No. MODE CD P LAY S TANDBY Re f No. MODE CD P LAY S TANDBY Re f No. MODE CD P LAY 1 25.9 26.0 2 12.7 12.8 3 0 0 4 12.6 12.7 5 4.7 4.7 6 0 0 7 0 0 8 0 0 9 0 3.0 1 25.9 26.0 2 12.7 12.7 3 0 0 4 12.7 12.7 5 4.7 4.7 6 0 0 7 0 0 8 0 0 9 3.0 3.0 1 25.9 25.6 2 12.7 12.7 Q3003 C 1.6 1.6 Q5740 C 17.1 17.1 Q5744 2 4.6 3 0 0 4 13.0 12.7 5 4.7 4.
SA-HT340E / SA-HT340EB / SA-HT340EG 14.5. Waveform Chart WF No. IC2018-13 (PLAY) WF No. IC2102-20 (PLAY) 5.4Vp-p(100nsec/div) 0.1Vp-p(500usec/div) WF No. IC1101-8 (PLAY) 1.1Vp-p(20usec/div) WF No. IC1101-18 (PLAY) 0.9Vp-p(20usec/div) WF No. IC1101-30 (PLAY) 2.2Vp-p(20usec/div) WF No. IC2102-30 (PLAY) 4.4Vp-p(5msec/div) WF No. IC1101-11 (PLAY) WF No. IC1101-13 (PLAY) 1Vp-p(20usec/div) 0.5Vp-p(20usec/div) WF No. IC1101-21 (PLAY) WF No. IC1101-24 (PLAY) 0.9Vp-p(20usec/div) 2.
SA-HT340E / SA-HT340EB / SA-HT340EG 15 Illustration of IC's, Transistors and Diodes C0CBCBD00018 (8p) C0EBA0000029 (4p) C0FBBK000050 (28p) C1AB00001731 (6p) C3ABPG000145 (54p) C3EBEG000072 (8p) C3EBGC000055 (8p) C9ZB00000461 (32p) No.1 C0GBG0000048 C0HBB0000057 (44p) C1AB00002463 (100p) C2CBYY000194 (100p) MN864701 (164p) MN2DS0009VP (256p) C0GAY0000013 48 25 1 1 No.
SA-HT340E / SA-HT340EB / SA-HT340EG 50
SA-HT340E / SA-HT340EB / SA-HT340EG 16 Wiring Connection Diagram TO TUNER PACK UNIT 1 PbF 10 C 1 CN2002 E FL P.C.B. TUNER EXTENT P.C.B. (SOLDER SIDE) Z6900 (SOLDER SIDE) PbF 10 CN2010 1 2 3 CP2010 CN6001 2 1 SENSOR 1 12 13 10 JK2002 3 1 AUX 2 JK1001 21 19 17 15 13 AV OUT 11 9 7 5 3 1 20 1 4 18 H6004 VR6800 16 14 12 D PbF 10 VOLUME P.C.B.
SA-HT340E / SA-HT340EB / SA-HT340EG 52
SA-HT340E / SA-HT340EB / SA-HT340EG 17 Block Diagram IC8251 C0GBG0000048 IC8001 MN2DS0009AP 138 PHOTO DETECTOR 137 A1 A4 B4 135 B2 A2 A3 HEAD AMP 136 B3 134 133 132 131 129 130 VIN1 VOL4+ 15 VOL4- 16 OPIN+ 4 VOL3+ 17 VOL3- 18 OPIN- 5 VOL1+ 14 VIN2 + VIN3 VIN4 LEVEL SHIFT VIN8 VIN7 VHALF 128 1 BIAS1 2 VIN1 TRAVERSE MOTOR + + VIN6 VIN5 PWM1 144 TRV DRV VIN10 VIN9 PWM0 145 F0 DRV 3 VIN2 23 VIN3 24 LDIN + LASER DIODE SPINDLE MOTOR Q8551,8552 LD DRIVE 12
SA-HT340E / SA-HT340EB / SA-HT340EG IC8051 C3ABPG000145 IC8001 MN2DS0009VP IC8421 C0FBBK000050 64M SDRAM DV3.
SA-HT340E / SA-HT340EB / SA-HT340EG TUNER PACK AM ANT FM ANT 1 7 MIXER FM IF AMP AM ANT COIL RF AMP 5 OSC +B AM OSC COIL Q1100 (Q1200) BUFFER Q1001 MUTING CONTROL MUTING 8 6 +B (FM) Rch TUN L FM/AM IF AMP, DET/AM OSC MIX /FM MPX 23 22 ALC 21 AM MIX AM OSC 20 19 18 17 16 15 14 DET OUT 24 AM RM AMP (LA1833NMNTLM) 13 DECODER BUFFER PHASE DET PILOT CANCEL AGC LEVEL DET S-CURVE STEREO SWITCH FM IF AM/FM IF BUFFER FM DET AM IF AM DET COMP JK1001 21PIN AV JACK VCO
SA-HT340E / SA-HT340EB / SA-HT340EG IC2102 C1AB00002463 ASP(INPUT SELECT/DIGITAL SOUND PROCESSOR/ELECTRONIC VOLUME/TONE) 100(99) RECOUTL (RECOUTR) 88(87) INL5 (INR5) 90(89) INL4 (INR4) TV L(R) CH 92(91) INL3 (INR3) TUNER L(R) 94(93) INL2 (INR2) 96(95) INL1 (INR1) 84(83) FL IN (FRIN) LINOUT-L(R) JK2002 AUX DVD MIX L(R) DVD FL(FR) -B +B DVD SL(SR) 85 VEE 86 VCC 81(80) AMP TONE FLSEL OUT (FRSEL OUT) 14 (21) 13 (22) FLVOL IN (FRVOL IN) AMP SL IN (SR IN) SLSEL OUT (SRSEL OUT)
SA-HT340E / SA-HT340EB / SA-HT340EG SIGNAL LINES IC5100 AN17831A POWER IC JK5000 FRONT L 8 CH2 INPUT + _ _ CH2 + OUTPUT 12 FR0NT +L FRONT +LOUT 4 8 7 FRONT R 6 : DVD VIDEO SIGNAL LINE : FM OSC SIGNAL LINE : FM /AM SIGNAL LINE : CD-DA (AUDIO /VIDEO) SIGNAL LINE ( ) Indicates the Pin No. of Right Channel.
SA-HT340E / SA-HT340EB / SA-HT340EG 58
SA-HT340E / SA-HT340EB / SA-HT340EG 18 Schematic Notes · This schematic diagram may be modified at any time with the development of new technology. Notes: S901: S902: S6800: S6804: S6805: S6801: S6802: S6806: S6803: VR6800: Play detection switch. Open detection switch. Open / Tray open / close switch ( Close). F. skip, search and Tuning switch ( / / TUNING ). R. skip, search and Tuning switch / / TUNING ). ( Stop and TUNE mode /FM mode TUNE MODE/FM MODE). switch ( / Play and memory switch ( Memory). ).
SA-HT340E / SA-HT340EB / SA-HT340EG 60
SA-HT340E / SA-HT340EB / SA-HT340EG 19 Schematic Diagram 19.1. (A) DVD Module (DV3.2) Circuit SCHEMATIC DIAGRAM-1 OPTICAL PICKUP UNIT CIRCUIT H 1 2 TO HFM PCB 3 4 5 6 GND VCC L4 J0JBC0000105 GND GND L3 J0JBC0000105 A : +B SIGNAL LINE FODRV C8 0.1 C8251 6.3V220 TRDRV OUT AD1 T+ GND 26 F+ 25 F24 T23 HFM 22 VHALF C8262 0.1 C8261 0.
SA-HT340E / SA-HT340EB / SA-HT340EG SCHEMATIC DIAGRAM-2 A DVD MODULE (DV3.2) CIRCUIT : +B SIGNAL LINE : DVD VIDEO SIGNAL LINE : DVD AUDIO SIGNAL LINE : MAIN SIGNAL LINE IC8151 C0DBEHG00006 REGULATOR CTL 1 VCC 2 GND OUT 3 4 ADJ 5 FP8101 R8153 R8154 620 1K VDD12 2R7V C8152 1 C8151 4.7 C8424 0.1 D+3.3V IC8421 C0FBBK000050 IC8111 C0CBCBD00018 5-CH DAC IC 3.3 REGULATOR IC C8113 470P D+5V VIN 8 1 VO C8112 1 2 NC NC 7 3 GND NC 6 C8111 0.
SA-HT340E / SA-HT340EB / SA-HT340EG SCHEMATIC DIAGRAM-3 DVD MODULE (DV3.2) CIRCUIT : +B SIGNAL LINE EXADR15 EXADR14 EXADR13 EXADR12 EXADR11 EXADR10 EXADR9 EXADR8 EXADR19 EXADR20 NEXWE IC8611 EEPROM (NOT SUPPILED) 1 A0 PNRST VCC 8 WP 7 2 A1 3 A2 SCL 6 4 GND SDA 5 C8611 0.1 RX8611 (4.
SA-HT340E / SA-HT340EB / SA-HT340EG SCHEMATIC DIAGRAM-4 TRCDATA1 TRCDATA0 TRCCLK 0.1 TRCDATA2 TRCST : DVD VIDEO SIGNAL LINE H R8041 33 C8015 0.1 RX8011 (82 x 4) C8014 0.1 C8013 RX8013 (82 x 4) 0.1 R8012 C8003 22 22 0.1 C8012 R8011 TRCDATA3 MDQ0 MDQ15 MDQ14 MDQ2 MDQ13 MDQ1 MDQ3 MDQ12 MDQ4 MDQ11 MDQ10 MDQ6 MDQ9 MDQ5 MDQ7 MDQ8 DQM1 DQM0 NWE : CD-DA SIGNAL LINE : DVD AUDIO SIGNAL LINE RX8019 (22 x 2) RX8018 (22 x 2) 22 0.1 C8004 R8013 0.1 C8016 C8017 0.
SA-HT340E / SA-HT340EB / SA-HT340EG 19.2.
SA-HT340E / SA-HT340EB / SA-HT340EG SCHEMATIC DIAGRAM-6 MAIN CIRCUIT :+B SIGNAL LINE VCC_CTRL C2000 0.
SA-HT340E / SA-HT340EB / SA-HT340EG SCHEMATIC DIAGRAM-7 R2620 12K R2621 39K C2606 16V10 R2601 47K C2601 AGC1 50 SUBOUT 48 83 FRIN DVD-FL 84 FLIN OPIN2 45 87 INR5 OPOUT2 44 88 INL5 AGND 43 89 INR4 AGND 42 IC2102 C1AB00002463 90 INL4 TV-RCH 91 INR3 TV-LCH SROUT 41 MIXR MIXL 94 INL2 SRVOLIN 37 95 INR1 SRSELOUT 36 96 INL1 SLSELOUT 35 97 MICIN 56K 3300P C2611 0.012 0.15 R2611 1.2K R2627 68K W2541 0 SUBW SR_OUT R2403 C2403 10K 0.047 C2402 0.
SA-HT340E / SA-HT340EB / SA-HT340EG SCHEMATIC DIAGRAM-8 MAIN CIRCUIT :+B SIGNAL LINE :-B SIGNAL LINE 9 10 11 12 W2522 0 L5101 G0AR65Y00001 L5102 G0AR65Y00001 FR- L5103 G0AR65Y00001 FL+ L5104 G0AR65Y00001 FL- FR+ C5123 220P C5122 220P W2517 0 MUTE_FRONT_SW POWER IC W2521 0 C5109 0.1 8 C5110 0.1 7 C5116 0.1 OUT+_L 6 C5117 0.1 GND_L 5 R5105 C5102 0.22 1.2K OUT-_L 4 R5106 C5103 0.22 1.2K MUTE 3 R5109 C5106 0.22 1.2K IN_L 2 R5110 C5107 0.22 1.
SA-HT340E / SA-HT340EB / SA-HT340EG SCHEMATIC DIAGRAM-9 C1008 1 CR RGB C1010 1 CVIN YIN BIAS SEL CYIN GND CBIN GND2 YOUT YSAG GND2 CYOUT CYSAG GND2 CBOUT CBSAG GND2 CROUT CRSAG 20 19 18 17 CRIN R1015 75 C1016 1 C1015 6.3V330 C1014 6.3V1000 B_OUT G_OUT BLANKING_IO FUNC_SW VCC2 MUTE1 VSAG 21 MUTE2 S2 CIN VOUT 22 VOUT_S DVD_A+5V CB W2506 0 S1 23 5 6 IN2 GND IN1 R1006 22K 4 IC1102 C1AB00001731 2 1 SWITCH Q1006 XN0460100L BUFFER R1008 4.
SA-HT340E / SA-HT340EB / SA-HT340EG SCHEMATIC DIAGRAM-10 B MAIN CIRCUIT :+B SIGNAL LINE C B : MAIN SIGNAL LINE :-B SIGNAL LINE FL CIRCUIT : FM /AM SIGNAL FL6901 A2BD00000160 VOUT_S RETURN V-OUT V-IN GND R1017 75 SW+_OUT SW+ C+_OUT C+ FR+ FR+_OUT FL+ FL+_OUT SR+ SR+_OUT SL+ SL+_OUT SW- SW-_OUT C-_OUT CFR- FR-_OUT FL- FL-_OUT SR- SR-_OUT SL- SL-_OUT JOG_A JOG_A JOG_B JOG_B KEY2 KEY2 DGND FANDCOUT(+) FANDCOUT(+) GND FANLOCK FANLOCK F2 F2 NP NP G1 G4 G5 NP G6
SA-HT340E / SA-HT340EB / SA-HT340EG 20 Printed Circuit Board 20.1. (A) DVD Module P.C.B. A D E F G H I J K L M N O DVD MODULE P.C.B.
SA-HT340E / SA-HT340EB / SA-HT340EG 20.2. (B) Main/Power P.C.B. A D F G H I J K L M N O MAIN P.C.B.
SA-HT340E / SA-HT340EB / SA-HT340EG 20.3. (C) FL, Volume, Tuner Extent, & Tray Loading P.C.B.
SA-HT340E / SA-HT340EB / SA-HT340EG 74
SA-HT340E / SA-HT340EB / SA-HT340EG 21 Basic Troubleshooting Guide 21.1. Basic Troubleshooting Guide for Traverse Unit (DVD Module P.C.B.
VIDEO DRIVER JK1001 EEPROM (AV) IC1101 C/Y/CR/CB/PY IC2018 ZFLAG MUTE_DVD DVD_CM DVD_STA DVD_CK DVD MODULE (DV 3.2) AUDIO/ VIDEO AUX EEPROM IC2004 FL6901 IC6901 SYSTEM CONTROL TRAY_OPEN TRAY_CLOSE TRAY_CCW Loading Drive IC904 TUNER FL DISPLAY FL DRIVER -VP SW+5V ASP IC2102 VREF DCDET HT340 OVERALL BLOCK FL-(FL2) FL+(FL1) REG Q2974/ D2974 SL+/SLSR+/SRSW+/SWC+/C- FR+/FRFL+/FL- SMPS MODULE +9.
SP Motor M M 77 LD Drive DVD OPU UNIT FO/TR Act TRV/SP Motor Driver IC8251 LD Drive CD TRV Motor M+9V +2.7V DV3.2 D+3.3V REG IC8111 EEPROM IC8611 MPEG2 Decode EFM+ Demodulate ECC DVD System LSI IC8001 VDD 1.2V REG IC8151 +5V Video output Audio DAC IC8421 (Y, C, CR/PR/R, CB/PB/B, Y/PY/G) Flash ROM IC8651 SD RAM IC8051 TRV sw D+5V Audio output SA-HT340E / SA-HT340EB / SA-HT340EG 22.1.
DVD Mix(L/R) DVD Front(L/R) DVD Center DVD Sub-Woofer DVD Surround(L/R) DVD Module TUNER In TV/VCR In MUSIC PORT In AUX In ASS ON DVD 5.1ch Play Back Mode Volume ON AGC ASP IC2102 HIC IC5100/IC5200 IC5300 Surround(L/R) Sub-Woofer Center Front(L/R) Head Phone SA-HT340E / SA-HT340EB / SA-HT340EG 22.2. HT340 Block (Analog Signal : DVD 5.
DVD Mix(L/R) DVD Front(L/R) DVD Center DVD Sub-Woofer DVD Surround(L/R) DVD Module TUNER In TV In TCR In AUX In Line Out ASS 2ch Analog input Mode Volume ON AGC ASP IC2102 HIC IC5100/IC5200 IC5300 Surround(L/R) Sub-Woofer Center Front(L/R) Head Phone SA-HT340E / SA-HT340EB / SA-HT340EG 22.3.
RF+5V +5V REG DC_13V Q2902/D2914 IC2301 OP-AMP VIDEO DVD PCONT IC2801 REG IC2903 DAMP+5V Q2904/ D2915 +12V T+9V SW+5V IC2103/IC2600 IC2104/IC2205 Q2935/ D2941 LOGIC SWITCH A+5V REG D+5V REG Q2914/ D2944 FOR WIRELESS MODELS ONLY IC1101 SCART DRIVER DVD MODULE D+2.
SYS6V -VP D+5V A+5V DVD2.7V +9V M+9V SW+5V -7V REG Q2974/D2974 REG Q2955/D2941 REG Q2914/D2944 Q2903 REG Q2904/D2915 REG Q2906/Q2907 R -28V REG IC2903 REG Q2913/D2943/D2942 SMPS +26/18V HT340 POWER(MAIN) BLOCK IC5300 IC5200 IC5100 C+/C- SW+/SW- SL-/SR- SR+/SL+ FR-/FL- FR+/FL+ SA-HT340E / SA-HT340EB / SA-HT340EG 22.5.
SA-HT340E / SA-HT340EB / SA-HT340EG 23 Terminal Function of ICs 23.1. IC2018 (C2CBYY000194): System Control Microprocessor IC Pin Terminal Name No.
SA-HT340E / SA-HT340EB / SA-HT340EG 24 Exploded Views 24.1.
SA-HT340E / SA-HT340EB / SA-HT340EG 84
SA-HT340E / SA-HT340EB / SA-HT340EG 24.2.
SA-HT340E / SA-HT340EB / SA-HT340EG 25 Replacement Parts List Notes: *Important safety notice: Components identified by mark have special characteristics important for safety purpose. Furthermore, special parts which have purposes of fire-retardant (resistors), high-quality sound (capacitors), low-noise (resistors), etc. are used. When replacing any of components, be sure to use only manufacture’s specified parts shown in the parts list. *Warning: This product uses a laser diode.
SA-HT340E / SA-HT340EB / SA-HT340EG 25.1. Component Parts List Ref. No. Part No. Part Name & Description Ref. No. 357 Remarks Part No.
SA-HT340E / SA-HT340EB / SA-HT340EG Ref. No. Q3003 Q3008 Q3009 Q5740 Q5741 Q5742 Q5744 Q5745 Q5746 Q8551 Q8552 Q8561 Q8562 QR8111 QR8420 QR8571 Part No.
SA-HT340E / SA-HT340EB / SA-HT340EG Ref. No. L5304 L6903 L8201 L8301 L8302 L8501 L8550 Part No. G0AR65Y00001 J0JBC0000041 G1C100K00019 G1C100K00019 G1C100K00019 G1C100K00019 G1C100KA0055 Part Name & Description CHOKE COIL CHIP INDUCTOR CHIP COIL CHIP COIL CHIP COIL CHIP COIL CHIP INDUCTOR Remarks Ref. No.
SA-HT340E / SA-HT340EB / SA-HT340EG Ref. No. R2072 R2073 R2075 R2076 R2077 R2078 R2079 R2080 R2081 R2082 R2084 R2085 R2086 R2087 R2088 R2089 R2090 R2091 R2092 R2093 R2094 R2095 R2096 R2097 R2101 R2111 R2112 R2113 R2114 R2115 R2160 R2161 R2164 R2165 R2185 R2191 R2194 R2201 R2211 R2212 R2214 R2215 R2218 R2260 R2261 R2264 R2265 R2285 R2291 R2294 R2300 R2301 R2302 R2303 R2304 R2307 R2312 R2336 R2339 R2400 R2401 R2402 R2403 R2404 R2405 R2406 R2407 R2412 R2436 R2439 R2500 R2501 R2502 Part No.
SA-HT340E / SA-HT340EB / SA-HT340EG Ref. No. R3009 R3014 R3015 R5101 R5102 R5104 R5105 R5106 R5108 R5109 R5110 R5111 R5112 R5201 R5202 R5204 R5205 R5206 R5208 R5209 R5210 R5211 R5212 R5301 R5302 R5304 R5305 R5306 R5308 R5309 R5310 R5311 R5312 R5313 R5533 R5534 R5736 R5754 R5755 R5756 R5757 R5758 R5759 R5760 R5761 R5762 R5763 R5764 R5765 R5766 R6801 R6802 R6803 R6804 R6805 R6905 R6914 R6916 R6917 R6918 R6919 R6934 R6936 R6939 R6940 R8003 R8011 R8012 R8013 R8041 R8153 R8154 R8211 Part No.
SA-HT340E / SA-HT340EB / SA-HT340EG Ref. No. RX8691 Part No.
SA-HT340E / SA-HT340EB / SA-HT340EG Ref. No. C2020 C2021 C2022 C2023 C2024 C2026 C2101 C2111 C2112 C2114 C2115 C2116 C2117 C2118 C2119 C2120 C2121 C2161 C2162 C2164 C2169 C2172 C2183 C2195 C2201 C2211 C2212 C2214 C2215 C2216 C2217 C2218 C2219 C2220 C2221 C2261 C2262 C2264 C2272 C2283 C2295 C2300 C2301 C2302 C2303 C2304 C2305 C2306 C2307 C2308 C2309 C2312 C2323 C2324 C2400 C2401 C2402 C2403 C2404 C2405 C2406 C2407 C2408 C2410 C2411 C2412 C2423 C2424 C2500 C2501 C2502 C2503 C2506 Part No.
SA-HT340E / SA-HT340EB / SA-HT340EG Ref. No. C3004 C3005 C3006 C3007 C3009 C5101 C5102 C5103 C5104 C5105 C5106 C5107 C5108 C5109 C5110 C5116 C5117 C5120 C5121 C5122 C5123 C5124 C5201 C5202 C5203 C5204 C5205 C5206 C5207 C5208 C5210 C5211 C5216 C5217 C5220 C5221 C5222 C5223 C5224 C5301 C5302 C5303 C5304 C5305 C5306 C5307 C5308 C5310 C5311 C5316 C5317 C5320 C5321 C5322 C5323 C5324 C5503 C5505 C5790 C5791 C5792 C5794 C5795 C5796 C5797 C5798 C5799 C6805 C6806 C6903 C6904 C6905 C6906 Part No.
SA-HT340E / SA-HT340EB / SA-HT340EG Ref. No. C8421 C8422 C8423 C8424 C8426 C8427 C8428 C8501 C8502 C8503 C8504 C8505 C8511 C8512 C8513 C8514 C8515 C8516 C8521 C8522 C8523 C8524 C8525 C8526 C8527 C8528 C8529 C8530 C8531 C8532 C8533 C8541 C8550 C8551 C8552 C8553 C8554 C8561 C8562 C8563 C8564 C8571 C8572 C8601 C8602 C8606 C8611 C8621 C8622 C8651 C8652 C8691 C8695 Part No.