Recording Equipment User Manual

279
Error Messages
Appendices
Not Blank Disc!
Cause: The CD-R/RW disc already has data written to it.
Action: Place a CD-R/RW disc with no data written to it (a
blank disc) in the CD-R/RW drive.If using a CD-
RW disc, you can erase the data on the disc in
order to create a blank disc (p. 214).
Not CD-RW Disc!
Cause: The disc is not a CD-R/RW disc, so the data
cannot be erased.
Action: Use a CD-R/RW disc.
Pattern Memory Full!
Cause: The total number of sounds in the drum and bass
patterns has exceeded 10,000.
Action: Delete unneeded patterns (p. 161, p. 174).
Protected Song!
Cause: Since Song Protect is ON, the operation cannot be
executed.
Action: Turn Song Protect Off. (p. 71)
Select Track!
Cause: You attempted to execute a track editing
operation without specifying the track to which
the operation will apply.
Action: Specify the track, and then execute the editing
operation.
Select Data!
Cause: The data or files upon which the operation is to
be performed have not yet been specified.
Action: Select data or files and repeat the operation.
Set Location!
Cause: No target data or file has been selected yet.
Action: Select the data before continuing.
Stop Recorder!
Cause: The operation you attempted cannot be done
while the recorder is running (playing or
recording).
Action: Press [STOP] to stop playback or recording.
Sync Track Full!
Cause: All of the remaining memory was used up during
the Sync Track recording process.
Action: No further recording will be possible. Reduce the
recording time and repeat the recording process.
Too Many Songs!
Cause 1: The song creation operation would result in the
number of songs exceeding 999.
Action 1: Erase unneeded songs (p. 69) and repeat the song
creation process.
Cause 2: The import operation would result in the number
of songs exceeding 999.
Action 2: Erase unneeded songs (p. 69) and repeat the song
import operation.
Too Long Name!
Cause: The names of files and folders on the current CD-
R/RW disc are too long.
Action: Add up the lengths of all file names and folder
names, and then modify these names to reduce the
total number of characters to 236 or less.
Too Many Tracks!
Cause: You attempted to write more than 99 tracks to the
audio CD being created.
Action: Reduce the number of tracks you are writing to 99
or fewer tracks.
Wrong Disc!
Cause: A disc other than the required CD-R/RW disc is
placed in the drive.
Action: Place a CD-R/RW disc in the drive.
BR-1600_R_e.book 279 ページ ２００７年１２月６日 木曜日 午前９時５２分