Recording Equipment User Manual
Table Of Contents
- USING THE UNIT SAFELY
- IMPORTANT NOTES
- Precautions Regarding the Hard Disk
- Before Using CD-R/RW Discs
- About the CD-ROM “Discrete Drums”
- Contents
- Introduction to the BR-1600CD
- Panel Descriptions
- Extra information on jacks and connectors
- Common operations and display items
- Section 1 Advanced Use
- Re-recording only the portion that is mistaken (Punch In/Out)
- Using V-Tracks
- Placing markers in your song (Marker)
- Registering and recalling mixer settings (Scene)
- Recalling scenes automatically during recording or playback (Auto Scene)
- Finding the start or end of a section of audio (Scrub/Preview)
- Editing a recorded performance (Track Edit)
- Maximizing the volume levels of data recorded to the tracks (Normalize)
- Organizing your songs
- Section 2 Using Effects
- Makeup of BR-1600CD effects
- Using insert effects
- Effect patches and banks
- Makeup of effect patches
- Modifying insert effect settings
- Switching compressors, equalizers, and low-cut filters between stereo and mono
- Saving insert effect settings (Effect Patch Write)
- Copying insert effect settings (Effect Patch Copy)
- Changing insert effect connections
- Using an expression pedal
- Insert effect algorithm list
- Insert effect parameter functions
- Acoustic Guitar Simulator
- Acoustic Processor
- 3 Band Equalizer
- 4 Band Equalizer
- Bass Simulator
- Bass Cut Filter
- Chorus
- 2x2 Chorus
- Compressor
- COSM Comp/Limiter (COSM Compressor/Limiter)
- COSM Overdrive/Distortion
- COSM PreAmp&Speaker
- De-esser
- Defretter
- Delay
- Distance
- Doubling
- Enhancer
- Flanger
- Foot Volume
- Humanizer
- Limiter
- Low Cut Filter
- Lo-Fi Box
- Mic Converter
- Noise Suppressor
- Octave
- Pan
- Phaser
- Pickup Simulator
- Pitch Shifter
- Preamp
- Ring Modulator
- Short Delay
- Slow Gear
- Speaker Simulator
- Sub Equalizer
- Tremolo
- Tremolo/Pan
- Uni-V
- Vibrato
- Voice Transformer
- Wah
- Using track-specific compressors and equalizers
- Using loop effects
- Fixing the pitch of vocals/Adding a backing chorus to vocals (Vocal Tool Box)
- The Vocal Tool Box
- Makeup of the Vocal Tool Box
- Vocal Tool Box patches
- Fixing the pitch of vocals (Pitch Correction)
- Setting the correction method for vocal pitch (Pitch Correction Edit)
- Applying a backing chorus to vocals (Harmony Sequence)
- Inserting rests in a backing chorus
- Setting the application method for backing choruses (Harmony Sequence Edit)
- Saving Vocal Tool Box settings (Patch Write)
- Copying Vocal Tool Box settings (Patch Copy)
- Recreating the characteristics of different monitor speakers (Speaker Modeling)
- Speaker Modeling parameter functions
- Using the Mastering Tool Kit
- Mastering Tool Kit parameter functions
- Effect parameters assigned to VALUE knobs
- Section 3 Using Rhythm
- Makeup of Drum/Bass/Loop Phrase
- Rhythm arrangements
- Using drums
- Creating drum patterns
- Preparing for recording
- Creating drum patterns using real-time recording
- Creating drum patterns using step recording
- Correcting drum patterns (Microscope)
- Changing the drum pattern’s groove (Swing)
- Changing a drum pattern’s name
- Copying drum patterns
- Deleting drum patterns
- Loading drum patterns from the CD-R/RW drive (SMF Import)
- Using bass
- Creating bass patterns
- Preparing for recording
- Creating bass patterns using real-time recording
- Creating bass patterns using step recording
- Correcting bass patterns (Microscope)
- Changing the bass pattern’s groove (Swing)
- Changing a bass pattern’s name
- Copying bass patterns
- Deleting bass patterns
- Loading bass patterns from the CD-R/RW drive (SMF Import)
- Using Loop Phrases
- Creating Loop Phrases
- Setting the Universal Beat for Drums, Bass, and Loop Phrases
- Using rhythm arrangements
- Creating rhythm arrangements
- Assembling drum and bass patterns
- Canceling pattern allocations
- Inserting patterns
- Inputting chords
- Changing and moving chords
- Deleting chords
- Inserting chords
- Assembling Loop Phrases
- Canceling Loop Phrase allocations
- Inserting Loop Phrases
- Copying a Loop Phrase from a rhythm arrangement to an audio track
- Modifying all of the loop phrases in the current rhythm arrangement (Arrangement Modify)
- Naming and saving rhythm arrangements
- Copying a rhythm arrangement
- Deleting a rhythm arrangement
- Setting tempos and beats for individual measures (Tempo Map/Beat Map)
- Using a metronome
- Section 4 Using the CD-R/RW Drive
- Section 5 Using MIDI
- MIDI fundamentals
- Playing drum and bass patterns on external MIDI sound module
- Synchronizing external MIDI sequencers and rhythm machines
- Controlling MMC-compatible devices from the BR-1600CD
- Controlling track volumes via MIDI (MIDI Fader)
- Inputting drum and bass patterns from a MIDI keyboard (MIDI Recording)
- Using MIDI to Control the Switching of the Insert Effects (Effects Program Change)
- Controlling external video devices from the BR-1600CD (V-LINK)
- Section 6 Using USB
- Section 7 Other Convenient Functions
- Tuning instruments (Tuner)
- Automatically adjusting the input volume balance (Level Calibration)
- Muting individual inputs
- Inputting audio with no loss of quality (Digital In Assign)
- Creating a master tape protected from digital copying
- Changing the content of the level meter display (Pre/Post Fader)
- Using condenser microphones (Phantom Power)
- Mixing audio-device output with the BR-1600CD’s output (Audio Sub Mix)
- Initializing all BR-1600CD settings (Initialize)
- Performing hard disk operations
- Appendices
222
MIDI fundamentals
By using MIDI to connect the BR-1600CD to other MIDI-
capable devices, you can perform the following:
●
Play rhythm guide performances on external MIDI
sound module
●
Synchronize with external MIDI sequencers and rhythm
machines
●
Control MMC-compatible devices from the BR-1600CD
●
Control track volumes automatically via MIDI (MIDI
Fader)
●
Input drum and bass patterns using an external
keyboard (MIDI Recording)
This section provides a basic description of MIDI and
explains the various ways it can be used.
What is MIDI?
MIDI stands for “Musical Instrument Digital Interface.”
MIDI is a global standard devised so that performance data,
program change data, and other similar information could be
exchanged among electronic musical instruments and
computers. If a device is MIDI compatible, it will be able to
exchange performance data with other MIDI compatible
devices, even if they are of a different type or brand.
MIDI connectors
MIDI messages (i.e., the data handled by MIDI) are
exchanged using the following three types of MIDI port.
MIDI IN:
This connector accepts the MIDI messages arriving from
other MIDI devices.
MIDI OUT:
All the MIDI messages from the BR-1600CD are sent out
from this connector.
MIDI THRU:
This connector re-transmits all the MIDI messages that arrive
at the MIDI IN connector.
The BR-1600CD is equipped with a MIDI IN and MIDI
OUT port, but not with a MIDI THRU port.
MIDI channels
The MIDI standard allows data to be exchanged among
multiple MIDI-compatible devices using a single MIDI cable,
and this is made possible by what are known as MIDI
channels.
In simple terms, a MIDI channel is quite similar to a TV
channel. For example, you can change TV channels to watch
programs from a variety of broadcasters. In this type of
situation, information is communicated only when the
channel on the transmitting end matches the channel on the
receiving end.
Likewise, with MIDI as well, if the transmitting device is (for
example) set to MIDI channel 1, MIDI messages will be
received only if the MIDI channel on the receiving end is also
set to 1.
MIDI Implementation Charts
MIDI makes it possible for a vast range of electronic musical
devices to communicate with each other. However, this does
not mean that every MIDI device can handle every single
type of MIDI message. In reality, two MIDI-compatible
devices can only exchange the MIDI messages that are
supported by both.
The user’s manual for any MIDI-compatible device will
contain a MIDI Implementation Chart, and this chart allows
you to quickly find out which MIDI messages the device in
question can transmit and receive.
When two MIDI devices are to be used together, you should
compare their MIDI implementation charts to make sure that
exchange of the required MIDI messages will be possible.
For more detailed information regarding the BR-1600CD’s
MIDI characteristics, refer to “MIDI Implementation” (p.
288).
BR-1600_R_e.book 222 ページ ２００７年１２月６日 木曜日 午前９時５２分