Recording Equipment User Manual
Table Of Contents
- USING THE UNIT SAFELY
- IMPORTANT NOTES
- Precautions Regarding the Hard Disk
- Before Using CD-R/RW Discs
- About the CD-ROM “Discrete Drums”
- Contents
- Introduction to the BR-1600CD
- Panel Descriptions
- Extra information on jacks and connectors
- Common operations and display items
- Section 1 Advanced Use
- Re-recording only the portion that is mistaken (Punch In/Out)
- Using V-Tracks
- Placing markers in your song (Marker)
- Registering and recalling mixer settings (Scene)
- Recalling scenes automatically during recording or playback (Auto Scene)
- Finding the start or end of a section of audio (Scrub/Preview)
- Editing a recorded performance (Track Edit)
- Maximizing the volume levels of data recorded to the tracks (Normalize)
- Organizing your songs
- Section 2 Using Effects
- Makeup of BR-1600CD effects
- Using insert effects
- Effect patches and banks
- Makeup of effect patches
- Modifying insert effect settings
- Switching compressors, equalizers, and low-cut filters between stereo and mono
- Saving insert effect settings (Effect Patch Write)
- Copying insert effect settings (Effect Patch Copy)
- Changing insert effect connections
- Using an expression pedal
- Insert effect algorithm list
- Insert effect parameter functions
- Acoustic Guitar Simulator
- Acoustic Processor
- 3 Band Equalizer
- 4 Band Equalizer
- Bass Simulator
- Bass Cut Filter
- Chorus
- 2x2 Chorus
- Compressor
- COSM Comp/Limiter (COSM Compressor/Limiter)
- COSM Overdrive/Distortion
- COSM PreAmp&Speaker
- De-esser
- Defretter
- Delay
- Distance
- Doubling
- Enhancer
- Flanger
- Foot Volume
- Humanizer
- Limiter
- Low Cut Filter
- Lo-Fi Box
- Mic Converter
- Noise Suppressor
- Octave
- Pan
- Phaser
- Pickup Simulator
- Pitch Shifter
- Preamp
- Ring Modulator
- Short Delay
- Slow Gear
- Speaker Simulator
- Sub Equalizer
- Tremolo
- Tremolo/Pan
- Uni-V
- Vibrato
- Voice Transformer
- Wah
- Using track-specific compressors and equalizers
- Using loop effects
- Fixing the pitch of vocals/Adding a backing chorus to vocals (Vocal Tool Box)
- The Vocal Tool Box
- Makeup of the Vocal Tool Box
- Vocal Tool Box patches
- Fixing the pitch of vocals (Pitch Correction)
- Setting the correction method for vocal pitch (Pitch Correction Edit)
- Applying a backing chorus to vocals (Harmony Sequence)
- Inserting rests in a backing chorus
- Setting the application method for backing choruses (Harmony Sequence Edit)
- Saving Vocal Tool Box settings (Patch Write)
- Copying Vocal Tool Box settings (Patch Copy)
- Recreating the characteristics of different monitor speakers (Speaker Modeling)
- Speaker Modeling parameter functions
- Using the Mastering Tool Kit
- Mastering Tool Kit parameter functions
- Effect parameters assigned to VALUE knobs
- Section 3 Using Rhythm
- Makeup of Drum/Bass/Loop Phrase
- Rhythm arrangements
- Using drums
- Creating drum patterns
- Preparing for recording
- Creating drum patterns using real-time recording
- Creating drum patterns using step recording
- Correcting drum patterns (Microscope)
- Changing the drum pattern’s groove (Swing)
- Changing a drum pattern’s name
- Copying drum patterns
- Deleting drum patterns
- Loading drum patterns from the CD-R/RW drive (SMF Import)
- Using bass
- Creating bass patterns
- Preparing for recording
- Creating bass patterns using real-time recording
- Creating bass patterns using step recording
- Correcting bass patterns (Microscope)
- Changing the bass pattern’s groove (Swing)
- Changing a bass pattern’s name
- Copying bass patterns
- Deleting bass patterns
- Loading bass patterns from the CD-R/RW drive (SMF Import)
- Using Loop Phrases
- Creating Loop Phrases
- Setting the Universal Beat for Drums, Bass, and Loop Phrases
- Using rhythm arrangements
- Creating rhythm arrangements
- Assembling drum and bass patterns
- Canceling pattern allocations
- Inserting patterns
- Inputting chords
- Changing and moving chords
- Deleting chords
- Inserting chords
- Assembling Loop Phrases
- Canceling Loop Phrase allocations
- Inserting Loop Phrases
- Copying a Loop Phrase from a rhythm arrangement to an audio track
- Modifying all of the loop phrases in the current rhythm arrangement (Arrangement Modify)
- Naming and saving rhythm arrangements
- Copying a rhythm arrangement
- Deleting a rhythm arrangement
- Setting tempos and beats for individual measures (Tempo Map/Beat Map)
- Using a metronome
- Section 4 Using the CD-R/RW Drive
- Section 5 Using MIDI
- MIDI fundamentals
- Playing drum and bass patterns on external MIDI sound module
- Synchronizing external MIDI sequencers and rhythm machines
- Controlling MMC-compatible devices from the BR-1600CD
- Controlling track volumes via MIDI (MIDI Fader)
- Inputting drum and bass patterns from a MIDI keyboard (MIDI Recording)
- Using MIDI to Control the Switching of the Insert Effects (Effects Program Change)
- Controlling external video devices from the BR-1600CD (V-LINK)
- Section 6 Using USB
- Section 7 Other Convenient Functions
- Tuning instruments (Tuner)
- Automatically adjusting the input volume balance (Level Calibration)
- Muting individual inputs
- Inputting audio with no loss of quality (Digital In Assign)
- Creating a master tape protected from digital copying
- Changing the content of the level meter display (Pre/Post Fader)
- Using condenser microphones (Phantom Power)
- Mixing audio-device output with the BR-1600CD’s output (Audio Sub Mix)
- Initializing all BR-1600CD settings (Initialize)
- Performing hard disk operations
- Appendices

103
Insert effect parameter functions
Section 2
Preamp
This effect is used to adjust the distortion and tone of guitar
sounds.
* When Bass, Middle, and Treble are all set to 0, certain Amp Type
settings may result in no sound being output.
Effect On/Off OFF, ON
Turns the preamp effect on or off.
Amp Type
This sets the type of preamp to be used. The distortion and tone
characteristics of each amp are as shown below:
■
With “COSM COMP GUITAR AMP,” or
“VO+GT.AMP” algorithms
■
With “COSM BASS AMP” or “COSM
COMP BASS AMP” algorithms
Volume 0–100
Adjusts the volume and distortion of the amp.
Bass GUITAR AMP: 0–100, BASS AMP: -100–+100
Adjusts the tone for the low frequency range.
Middle GUITAR AMP: 0–100, BASS AMP:-100–+100
Adjusts the tone for the middle frequency range.
* If you have selected “MATCH” or “VO DRV” as the preamp type, the
middle control will have no effect.
Treble GUITAR AMP: 0-100, BASS AMP: -100–+100
Adjusts the tone for the high frequency range.
Presence 0–100
Adjusts the tone of the ultra-high frequency range.
* This is not displayed when the algorithm is “COSM BASS AMP” or
“COSM COMP BASS AMP.”
* If you have selected “MATCH” or “VO DRV” as the preamp type,
raising the presence will cut the high range (i.e., the value will change
from “0” to “-100”).
Master 0–100
Adjusts the overall volume of the preamp.
Bright OFF, ON
Turns the bright setting on or off.
OFF:
No brightness is added.
ON:
Brightness is added to create a lighter, crisper tone.
* This will not be displayed for certain Amp Type settings.
Gain LOW, MIDDLE, HIGH
Adjusts the distortion generated by the amp, with the level
increasing in sequence for LOW, MIDDLE, and HIGH.
* The sound of each type is created with the assumption that gain is set to
MIDDLE. It is normal, therefore, to use this setting.
JC-120
The sound of the Roland “JC-120,” a favor-
ite of pro musicians around the world.
CLEAN
The sound of a conventional built-in tube
amp.
CRUNCH
Allows you to reproduce a crunch effect
and recreate natural distortion.
MATCH
The latest tube-amp sound widely used in
all styles from blues and rock.
VO DRV
The Liverpool sound of the 60’s.
BLUES
A lead sound with a rich middle ideal for
blues.
BG LEAD
The sound of a tube amp typical of the late
‘70s to ‘80s and characterized by a distinc-
tive midrange.
MS
The sound of a large tube-amp stack that
was indispensable to the British hard rock
of the 70’s and is still used today by many
hard rock guitarists.
1
A trebly sound created by using in-
put I of the guitar amp.
2
A trebly sound created by using in-
put II of the guitar amp.
1+2
The sound achieved by connecting
Inputs I and II on the guitar amp in
parallel, and giving a stronger low
end than can be achieved with Input
I alone.
SLDN
A tube amp sound with versatile distortion,
usable in a wide range of styles.
METAL
The sound of a large tube amp, suitable for
heavy metal.
METAL D
A powerful, high-gain metal sound.
AC
The vintage sound of an early transistor
amp.
AMG
The sound of a large double-stack, vacuum-
tube amp with ultra-lows and a crisp edge.
BR-1600_R_e.book 103 ページ 2007年12月6日 木曜日 午前9時52分