Technical information

_T4130985227_201046T1423_EMEA_en-US_print_RC9.09_dm15ein_DatabookPDF
CCS 900 Ultro Discussion System | Architect and Engineering Specifications |
33
Extension Cable Assembly
The extension cable assembly shall consist of 5 m (197 in)
and 10 m (394 in) of 6 mm (0.24 in) diameter cable
terminated at one end with a molded 7-pole male circular
connector, and at the other end with a molded 7-pole
female circular connector. The installation cable shall
consist
of 100 m (3940 in) of 6 mm (0.24 in) diameter cable
plus 5 connector sets, male & female (7-pole circular).
Set of 25 Cable Locking Clamps
A set of Cable Locking Clamps shall match male and female
cable connectors, such as those on Extension Cable
Assemblies. Each male/female connector shall require one
clamp.
Cable Clamp
The Cable Clamp shall secure loop‑through cables to the
next discussion unit to prevent disconnection. Each male/
female connector shall require one cable lock clamp.
www.boschsecurity.com
Bosch Security Systems B.V.
1