INSTRUCTIONS CONTENTS Panel Introduction Basic Function Remote Control Operation Turn on/off Access main interface USB/SD Card Operation Radio Operation Disc Operation Play/Eject Disc DVD/VCD Disc Playback CD Disc Playback MP3/WMA Format Disc Playback Touch Menu ST.
INSTRUCTIONS INSTRUCTIONS PANEL INTRODUCTION ACCESSORY Accessory Quantity Wire 1PC USB Cable 1PC Remote Controller 1PC Warranty card 2PCS Disassemble Key 2PCS DVD Parental control function DVD Parental control function DVD Parental control function: The default set for DVD is #8 adult, which means all grades of DVD can be read without entering password.
BASIC FUNCTION INSTRUCTIONS 1. PWR/VOL button Press this button will turn on power, during working longer press this button will turn off power, on any mode, shortly press will return main menu, rotate this button will adjust volume level. SPECIFICATIONS 2. MENU button Press this button to back to the main menu. Power supply DC 12V Power range 10.8-16.0V DC Max Current Consumption 15A Ground system Negative ground 3.
Remote Control Operation WIRING DIAGRAM This player is equipped with ISO standard connector, please follow below instruction: ● V-OUT1 5 F D - Media RL SW AUX-L AUX-R G2 G1 G6 G5 G4 G9 G8 G7 5 ANT ANT-FM/AM antenna E1-Black Learning SWC GND G2 - White Rear RCA L output E2-Brown Learning SWC G3 - Yellow VIDEO–OUT1 E3- White Learning SWC G4 - Brown Subwoofer output E4-Dark grey with Red /White tip Front RCA output (Right Red Left White) G5 - Yellow Rear view input E5-Rear USB Plug
INSTRUCTIONS Touch screen Calibration 14. 0-10+ Button Press this button to choose desired song、 section、preset stations. Decimal numbers, for example the 19th song, press 10+ and 9 button. 23. ANGLE Button In DVD mode, press this button to change play angle. 24. SETUP Button In audio mode, press this button to choose different set items. 15. AMS / RPT Button In radio mode, press this button to browse stored stations. In audio mode, press this button to play repeatedly. 25.
INSTRUCTIONS Turn on/off Audio setting When the ignition switch is put in ACC or ON position, Press [ ] button on the front panel to turn on the unit. After the host starts, hold [ ] button for 3 seconds , the host will turn off. Click icon on setup interface to access audio setting interface, as shown in right (PIC 1) diagram: You can turn on or turn off the existing functions on audio setting interface and adjust the rearview volume.
Radio Operation Access setup interface 1. Enter/exit Touch [Radio] icon in the main interface to enter into the radio interface. Touch icon to return to main interface, and then touch other function icons so as to exit radio mode. 2. Band selection Click icon so as to switch among FM1, FM2, FM3, AM1, AM2 bands. 3. Search/Save radio stations Short press icon to browse the stored radio stations.
Other Operation Disc Operation Rear view function In any running state, the video signal can switch to reverse video state when reversing the car, and the system shall return to its initial running state after reversing the car. Warning Do not rely on CCD system completely, please make sure you use direct eyesight while driving. Back rearview system only assists in driving. As the distance range of rearview system is limited, completely relying on the rearview system during driving may cause accidents.
INSTRUCTIONS MEDIA Operation Time setting Touch this button to access time setting interface. Connect to Media first, touch [Media] icon on main interface to access Media interface, as shown in below diagram: Stereo on/off Touch it so as to turn on/off stereo. Fast forward play/ Fast backward play Volume adjustment knob Play/Pause Return to root menu Touch this icon, it shall return to root menu of disk in DVD state and access PBC menu playing in VCD state.
