BV9362BI BV9362BI
INSTRUCTIONS INSTRUCTIONS ACCESSORY Warning: To ensure safety while driving and to comply with laws, drivers should not watch video or operate the video device while driving. DVD Parental control function DVD Parental control function DVD Parental control function: The default set for DVD is #8 adult, which means all grades of DVD can be read without entering password.
INSTRUCTIONS INSTRUCTIONS SPECIFICATIONS PANEL INTRODUCTION Power supply DC 12V Power range 10.8-16.0V DC Max Current Consumption 15A Ground system Negative ground Power Output 80 WattsX4 Channels 9 1 2 FM tuner 3 US frequency range 87.5-107.9MHz European frequency range 87.
BASIC FUNCTION WIRING DIAGRAM 1. /SRC Button Press this button shortly to power on, press this button longer to power off. In normal situation, press SOURCE button can return to the main menu. 2. MUTE Button Press this button to shut off sound output, repress this button to resume sound output; Press this button longer to turn on/off TFT LCD display.
Touch screen Calibration Remote Control Operation Please follow the below instructions to calibrate when there is no touch or touch is not accurate. 3. SOURCE Button Press this button to change mode. 28 Step 1: Press the mode button in the unit to switch to DVD mode. 4. EQ Button Press this button to choose POP、ROCK、 CLASSIC、EQ off. Step 2: Insert a DVD disc, after DVD is loaded, press the stop button “ ” as show in picture (1). in the remote short, the unit will display as show in picture (2). 5.
INSTRUCTIONS 14. 0-10+ Button Press this button to choose desired song、 section、preset stations. Decimal numbers, for example the 19th song, press 10+ and 9 button. 15. AMS / RPT Button In radio mode, press this button to browse stored stations. In audio mode, press this button to play repeatedly. INSTRUCTIONS 23. ANGLE Button In DVD mode, press this button to change play angle. 24. SETUP Button In audio mode, press this button to choose different set items. 25.
Access setup interface Turn on/off Click [Setting] icon on main interface to access setup interface. When the ignition switch is put in ACC or ON position, Press [ ] button on the front ] button for 3 seconds , the host panel to turn on the unit. After the host starts, hold [ will turn off. General setting Click icon on setup interface to access general setting interface. In general setting interface, you can select to turn on or turn off the existing functions.
Radio Operation Other Operation 1. Enter/exit Touch [Radio] icon in the main interface to enter into the radio interface. Touch icon to return to main interface, and then touch other function icons so as to exit radio mode. Rear view function In any running state, the video signal can switch to reverse video state when reversing the car, and the system shall return to its initial running state after reversing the car. 2. Band selection Click icon so as to switch among FM1, FM2, FM3, AM1, AM2 bands.
MEDIA Operation Disc Operation Connect to Media first, touch [Media] icon on main interface to access Media interface, as shown in below diagram: Fast forward play/Fast backward play Volume adjustment knob Play/Pause Stop Previous Song/Next Song 1. Play/eject disc Play disc Insert the disc into the disc slot with the printing surface up, system will detect the disc and automatically take it in to read and play. Eject disc (1) Click【OPEN】button on the panel to eject the disc.
INSTRUCTIONS Time setting Touch this button to access time setting interface. Stereo on/off Touch it so as to turn on/off stereo. Return to root menu Touch this icon, it shall return to root menu of disk in DVD state and access PBC menu playing in VCD state. All chapters in the disk shall be displayed on the interface, touch the chapter icon directly for playing. Access title menu Press this button to return to title menu of the disk. Directly click menu bar at title menu interface for playing.
