Specifications

E - 24
Setup Items Introduction
1) SYSTEM SETUP
The system setup options are illustrated below:
SCREEN SAVER
If the screen saver is on, when your disc player is in Stop, Open, or No Disc state, or there is a
frame frozen for more than 30 minute, the screen saver will be displayed. This feature can protect
the screen from damage.
ON: Choose this setting to activate the screen saver.
OFF: Choose this setting to cancel the screen saver
The default setting is ON.
TV TYPE
16 : 9 (Wide Screen): Choose this setting if your Multi-Media player is connected to a wide
screen TV. If you choose this setting and you don't have a wide screen TV, the images on the
screen may appear distorted due to vertical compression.
4 : 3 LB (Letter Box): Choosing this setting if your Multi-Media player is connected to a normal
ratio TV. connector You'll see the movies in their original aspect ratio (height-to-width ratio). You'll
see the entire frame of the movie, but it will take up a smaller portion of the screen vertically. The
movie might appear with black bars at the top and bottom of the screen.
4 : 3 PS (Pan & Scan): Choosing this setting if your Multi-Media player is connected to a normal
ratio TV. You can fill the movie to the entire screen of your TV. This might mean that parts of the
picture (the left and right edges) won't be seen.
The image display ratio is related to the recorded disc format. Some disc can not display images
in the aspect ratio you choose.
If you play a disc recorded in 4:3 format on a wide screen TV, black bars will appear on the left and
right side of the screen.
You must adjust the screen setting depending on the type of the television you have.
NOTE: