Specifications

E - 9
Serial number
Name
1
2
Information
CLOCK
3
4
5
6
7
8
9
10
11
BND
LOUD
EQ
MONO
LOC
Radio
/
Function description
CURRENT BAND AND FREQUENCY
CURRENT TIME
BAND SWITCH(FM1\FM2\FM3\AM1 AM2 )
LOUDNESS ON/OFF
ROCK/POP/CLASS/EQ.OFF
LOCAL/DX
TOUCH TO SELECT RADIO AND PRESS LONGER TO STORE
CURRENT FREQUENCY
AUTO SCAN AND STORE RADIO
ST:ON \OFF
BACK TO MAIN MENU
FREQUENCY BACKWARD/FREQUENCY FORWARD
7. RADIO OPERATION
RADIO FUNCTION KEY
Touch the icon in any mode to go back to the main menu and select"RADIO"to enter the
radio mode.
AUTO MEMORY STORE: press AMS button for more than 1 second to enter auto store mode. The
radio will automatically store 6 stations to the 6 preset memories of the current band. To stop auto
store, press AMS button again.
BAND BUTTON (BAND)
Press this button to change between band FM1, FM2, FM3 or MW(AM)1, MW(AM)2 bands .
TUNING UP / DOWN BUTTON ( )
1.Press these buttons briefly will operate MANUAL SEARCH tuning mode, the radio will tune up or
down to the next station and remain on the frequency.
2.Press these buttons more than 2 seconds, operate as AUTO SEARCH buttons, under this mode the
tuning frequency will advance up or down rapidly when the button is pressed.
Use this control to select stereo or mono reception for FM radio stations. You can sometimes improve
reception of distant stations by selecting mono mode.
FM MONO / STEREO BUTTON (MONO)
LOCAL / DX BUTTON (LOC)
This control can be used to change between Local and Distant (-DX) tuning mode. Local mode
improves reception in some areas where the signal is too strong.
STATION PRESET BUTTONS (M1-M6)
You can store & recall six preset radio stations by pressing M1-M6 buttons
TO STORE A STATION: 1) select a band (if needed)
2) select a station by tuning up / down button
3) hold a preset button which you want store the station for at least 2 seconds.
The preset number will appear on the display accompanied by a beeps sound.
TO RECALL A STATION: 1) select a band (if needed)
2) press a preset button briefly to recall the stored station.
SCAN BUTTON (SCAN)
Press this button, the radio will tune up to search stations, the available stations will blinking and stay
on the display for a few seconds.
AUTO MEMORY STORE / PRESET SCAN BUTTON (AMS)
PRESET SCAN: press AMS button for less than 1 second to scan all preset stations in the memories
Of the current band and stay on each memory stations for about 5 seconds. The memory location
indicator on the LCD will flash during the process. To stop preset scan, press AMS button again.