4.
1. HANDLING COMPACT DISCS MOISTURE CONDENSATION On a rainy day or in a very damp area, moisture may condense on the lenses inside the unit. Should this occur, the unit will not operate properly. In such a case, remove the disc and wait for about an hour until the moisture has evaporated. NOTES ON CDs 1. A dirty or defective disc may cause sound dropouts while playing. To enjoy optimum sound, handle the disc as follows. Handle the disc by its edge. To keep the disc clean, do not touch the surface (P.1). P.
2. INSTALLATION Before finally installing the unit, connect the wiring temporarily and make sure it is all connected up properly and the unit and system work properly. Use only the parts included with the unit to ensure proper installation. The use of unauthorized parts can cause malfunctions. Consult with your nearest dealer if installation requires the drilling of holes or other modifications of the vehicle.
DIN REAR-MOUNT (METHOD B) Installation using the screw holes on the sides of the unit. Fastening the unit to the factory radio mounting bracket. Screw Note: the mounting box, outer trim ring,and half-sleeve are not used for this installation. Mounting bracket Note: The mounting box, metal half sleeve, are not included in the packing. Mounting bracket Screw Mounting bracket Dashboard or console DETACHABLE CONTROL PANEL (D.C.P.) Removing The Detachable Control Panel (D.C.P.). PANEL RELEASE BUTTON 1.
3. ELECTRICAL CONNECTION a. Make sure your car battery is a 12 volt (6 filler caps) negative ground system (if not, a converter will be necessary). b. Before starting wiring connections, disconnect the power supply by removing the fuse from the fuse box. c. Connect the power wire to one of the extra terminals of the fuse box. d. Connect the black ground wire to a metal part of the car. It is important to make good contact. e. Make other wiring connections as shown. f.
4 PANEL RELEASE BUTTON POWER/ MUTE BUTTON ENCODER VOLUME KNOB INFRARED REMOTE SENSOR DSP/ LEFT/ RIGHT BUTTON TALK BUTTON BAND/ LOUDNESS BUTTON CANCEL/ MODE BUTTON FUNCTION SELECT BUTTON DISPLAY BUTTON AMS/ PLAY/PAUSE BUTTON LOC BUTTON EJECT BUTTON TUNING / SEEK UP/DOWN NEXT/BACK BUTTON E-5 SCAN BUTTON FM MONO / STEREO BUTTON
DISC/MENU BUTTON E-6
5. BASIC OPERATION PANEL RELEASE BUTTON Press this button to remove the control panel. POWER BUTTON Press power button to turn on long press to turn off the unit. MUTE BUTTON ( MUTE) Press MUTE button to mute the sound quickly. Press it again to restore the previous sound level. When mute is on, the Mute indicator on the LCD will light up. MODE BUTTON (MODE) Press this button to select radio,DISC/USB/SD/MMC/ A/V- IN FRONT /A/V-IN REAR.
6. SYSTEM SETUP Basic operation of menu setup 1. General setup menu In main menu, touch to enter into"SETTINGS"mode. 2. Touch GENERAL setup 3. Touch TIME setup 4. Touch LANGUAGE setup 5. Touch AUDIO setup 6. Touch VIDEO setup 7. Touch RADIO setup BEEP 8. Touch ON CALIBRATE setup + + + + + + CALIBRATION : Touch + centre with a pen point, and Touch it again to enter into the calibration menu and display.
7. RADIO OPERATION RADIO FUNCTION KEY Touch the icon in any mode to go back to the main menu and select"RADIO"to enter the radio mode. Name Function description 2 Radio 3 BND BACK TO MAIN MENU TOUCH TO SELECT RADIO AND PRESS LONGER TO STORE CURRENT FREQUENCY BAND SWITCH(FM1\FM2\FM3\AM1 AM2 ) Serial number 1 AUTO SCAN AND STORE RADIO 4 5 6 7 8 9 10 11 EQ LOC / CLOCK LOUD MONO Information ROCK/POP/CLASS/EQ.
8. Blue Tooth Hand Free Panel / Remote Control Function Key Matrix 1 1 9 10 8 1 3 2 2 3 4 5 3 6 Blue Tooth Hand Free Function BLUETOOTH Function Button 1 TALK 2 CANCEL/STOP (short press) 3 Numberic Key 4 7 Make an Outgoing call press TALK Button once to ready input the Tel number what you want to phone and the tel number you dialled will be showed on the Display. Once you press the TALK again to dial the number and the DIALLING will, be showed on display.
BLUETOOTH MODE OPERATION INSTRUCTION FOR HANDSFREE FUNCTION 1. PAIR IT WITH YOUR PHONE (PAIRING) Before you use your Car HANDSFREE System, you need to pair it with your mobile phone. 1. The Bluetooth set system on the head unit will automatically go into pairing mode when the Ignition is being turned on and the Bluetooth symbol indicator on the display will Flash every 1 second. 2. Set your Bluetooth phone to discover the device ID--BOSS AUDIO. 3. Your phone will find the device ID--BOSS AUDIO.
4. BLUETOOTH NOTICE Before you start to use our Bluetooth HEAD UNIT , Please pair the unit with your mobile phone completely. Please refer to the section of PAIRING To ensure the best reception for Pairing & Re-connection, please make sure the phone Battery is fully charged when making the pairing or Re-connection. Every time you turn the ignition key from off to on, the unit will automatically re-connect with the mobile phone. By pressing the TALK button the unit will start the Auto-Reconnection .
Specifications for Blue tooth BLUE TOOTH Power Consumption Output Power Frequency Band Range Standard 200mA Max. 0 dBm (Class II) 2.4GHz ~ 2.4835GHz ISM Band 3 meters (free space) Bluetooth 2.1 specification Specifications subject to change without notice. Remark: Our Bluetooth Handsfree System adapts to the Bluetooth spec V2.1 and higher. It is compatible with profiles such as Handsfree profile and Head Set profile.
9.DISC/MULTI-MEDIA FILES OPERATIONS 1 2 3 S.N 4 5 6 7 8 9 10 11 12 NAME FUNCTION 13 14 15 DESCRIPTION PAUSE/PLAY EJECT BUTTON RANDOM BUTTON L/R BUTTON ZOOM STOP BUTTON Folder BACKWARD/ FORWARD TITLE TITLE MENU REPEAT.
MULTI-MEDIA FILE OR FOLDER SEARCHING CD SLOT Insert the disc into CD slot. The CD will begin to play. EJECT BUTTON Press this button to eject the CD from the unit. The receiver will switches to radio mode automatically. PLAY/PAUSE BUTTON ( ) Press this button briefly to pause disc play, press again to resume play. NEXT/BACK BUTTONS( & ) When NEXT is pressed, the unit will go to the next track and start the playback. When BACK is pressed, the unit will go back to the previous track and start the playback.
GO TO BUTTON (GO TO) Using GO TO feature to select track number or specific time. A. Press GO TO button, the screen will display the following message: B. Press Arrow Left/Right buttons to highlight the track number or the time option. C. Use numeric buttons to enter the track you want to play or the elapsed time you want to go to in that track. D. Press OK button to start playback.
11. MMC/SD CARD & USB DEVICE OPERATIONS START THE USB DEVICE MODE 1.The USB mini socket is accessible as indicated in picture 1.(P.1) 2.Plug in the USB drive / device completely as indicated in picture 2(P.2) and display will show “USB” to indicate that the USB drive / device is being plugged in correctly & the download has begun. 3.Does not matter what mode the unit is in, once a USB drive / device is being plugged into the unit, unit will automatically switch to USB mode. 4.
START THE SD/MMC MODE P.4 D.C.P. P.5 1.Press panel release button to release the front panel.(P.4) 2.The SD/MMC card slot is located on top of the front panel 3. Insert the SD/MMC card into the card slot in the correct direction until a CLICK sound is heard. 4.Close the front panel. 5. The display will show CARD to indicate that the SD or MMC card is correctly inserted. Once the SD or MMC card is inserted, the file will automatically loaded & playback will also start. 6.
12. VIDEO DISC OPERATIONS S.N Description Name Function Information bar DISPLAY DISC INFO.
PLAY BUTTON ( ) Press this button briefly to pause disc play, press again to resume play. STOP BUTTON ( ) Stop the current disc playback. Briefly press the STOP button to stop the unit playback, when the PLAY button is pressed, normal playback will continue. Press STOP two times consecutively to enter the clear stop mode. Under the clear stop mode, if PLAY is pressed, the disc will resume the playback from the beginning of the disc. OK BUTTON Use this button to confirm the selection.
The screen will display the following message: PBC FUNCTION BUTTON (PBC) Press the PBC button to turn on PBC function. The unit will show the song list on the screen of the monitor after the WARNING from the Video CD. Then you can choose the song by pressing the desired number key. Press PBC key return to manual of Video CD, NOTE: This only operates with the PBC function on VCD. GO TO BUTTON (GO TO) Using GO TO feature to select track number or specific time: A.
PROGRAM BUTTON (PROG) The PROGRAM feature, select TITLE/CHAPTER to edit. A. Use numeric buttons to enter highlight PROGRAM title/chapter,for example: press numeric button title 2,chapter 4,PROGRAM T02/C04 appears it means Title 2,chapter 4 will be played first then press numeric button title 3,chapter 5 and PROGRAM T03/C05 appears, press the different numeric button to select the corresponding title/chapter and then you can program title/chapter to your need.
13. SET UP MENU OPERATION General Steps of Setup Menu 1) Press the Setup button, the main setup menu appears. When the main menu displayed, the Video will auto pause. 2) Press the Left and Right arrow buttons to highlight the icon of the desired page, then press the Down or Right arrow button to activate that page; For example, if you want to setup the video page, press Right to highlight the video icon, the video page will be displayed on the screen.
Setup Items Introduction 1) SYSTEM SETUP The system setup options are illustrated below: SCREEN SAVER If the screen saver is on, when your disc player is in Stop, Open, or No Disc state, or there is a frame frozen for more than 30 minute, the screen saver will be displayed. This feature can protect the screen from damage. ON: Choose this setting to activate the screen saver. OFF: Choose this setting to cancel the screen saver The default setting is ON.
PASSWORD The password option is initialized locked, and you cannot set the ratings limit or change the password. In order for the Ratings feature work, the password mode must be turned on. If you want to set the ratings limit, you will need to enter the default password, which is 0000, then press ok to confirm. To change the password, you will be prompted for the old password, then be prompted for a new. Enter a 4-digit number (this is your password).
3).VIDEO SETUP The video setup options are illustrated below: BRIGHTNESS Use the Up and Down arrow button to move the scroll and adjust the brightness. CONTRAST Use the Up and Down arrow button to move the scroll and adjust the contrast. HUE Use the Up and Down arrow button to move the scroll and adjust the hue. SATURATION Use the Up and Down arrow button to move the scroll and adjust the saturation. SHARPNESS Use the Up and Down arrow button to move the scroll and adjust the sharpness. 4).
14. SPECIFICATIONS CD PLAYER System Usable disc Sampling frequency No of quantization bits Frequency Number of channels S/N Ration Compact disc audio system Compact disc, CD-R, CD-RW 44.1KHz 1bit 20-20,000Hz 2 stereo 70dB RADIO SECTION FM Frequency Range Intermediate Frequency Usable Sensitivity Stereo Separation S/N Ratio 87.5 -108 MHz (EURO) 87.5 -107.9 MHz (USA) 10.
