Instruction manual

4.3 T
o redial the last phone number dialed
(1) Short press TEL button, it will show last phone number on LCD, then it will
execute the dialing.
(2)Short press REDIAL button, it will dial the last phone number.
5. Accept/Reject/End Call
5.1 Incoming call Ringing, short press TEL button to accept the call;
5.2 To reject Incoming call, short press HANGUP button to reject the call
5.3 During a phone call, short press HANGUP button to end the call.
Note: When a incoming call is present the caller’s phone number will be displayed
on the screen.
6. Dialing or receiving call when the unit is in standby (while your phone is paired)
When the stereo is in sleep mode( Acc on and standby), to execute a dialing
(with mobile phone) or receiving a call, the car audio will temporarily wake up.
7. To play a AUDIO file from a external bluetooth device (mobile phone) on the Wall
Mount stereo
After the device has been paired successfully and the Wall mount Stereo screen displays
BT LINK.
If your mobile device support A2DP you will then we able to stream music from
your Blue Tooth device so it can be played by the stereo speaker.
Your must select on your mobile blue tooth device to play the audio through bluetooth
If your mobile device supports AVRCP then you will be able to control the basic phone
audio output functions by the Wall mount Stereo controls. Eg. Play Pause..