Specifications

19
 Insulate unconnected wires with vinyl tape or other similar material.
Warning!
To prevent short circuits during installation, disconnect the
vehicl
e
’
s negative battery lead before making any power connections.
Installation procedure
1.
Screw the Installation Bracket to the beam or plywood using the ST4.2x16
screws.
2. Installing the trim ring on the player using the TB 2.6x6 screws .
3. Plug in power harness and audio/video source cablesinto the overhead
monitor .
4. Attach the player to the Installation Bracket using the PM4x8 .
5. Check the car’s brake lights, blinkers, wiper, etc. to ensure they are
working property.
8 Screws ST 4. 2x16
4 Screws PM 4x8
7 Screws TB 2. 6x6