Specifications

9
Basic Operation
Open the monito
r
1.
Press the Panel open button to lower
the overhead monitor screen.
2. Gently swing the LCD down and adjust
the angle for viewing.
CAUTION:The LCD opens to a maximum
angle of 120° degrees. Do not attempt to open it further.
Stow the monito
r
Gently push the back side of the display panel until it clicks into the overhead
housing.The monitor turns off automatically when you return it to the closed
position.
Note :When closing the display panel , do not let cords or other items get
caught between the display and the overhead housing . Doing so can
seriously damage the screen.
For your safety, close the LCD panel when you are not using it.
Handling disc
 To keep a disc clean, do not touch the play side
(non-label side).
 Do not attach sticky notes to or put tape on a disc.
 Keep discs away from direct sunlight and heat.
 Store discs in a protective disc case.
 To clean the disc , wipe the disc outwards
from the center with a clean cloth.
Turn the player on
1. Use the system with the vehicle running or with the ignition key switch in
the "accessory" position .
2.
To lower the screen , press the Panel Open button and move the screen
into a viewing position. The system will power on automatically .
3. Touch SOURCE icon to switch the mode.
Note:You cannot insert a DVD into the slot if you have selected an
alternate audio-video source (AV 1 IN AV 2 IN or ipod/iPhone).