Specifications

6. PATTERN Section

To delete a drum sound that has been input:

1. Right-click on the desired square and select “Delete” from the menu that appears.

2. The drum sound is deleted.

* You can also press your computer’s Delete key to delete the drum sound.

To adjust the velocity of the drum sound input in the currently selected square:

* Immediately after Rhythm Editor has been started, the velocity of newly input drum sounds will have

the default value (100).

* After the velocity for any drum sound has been adjusted, the velocity for any newly input drum sound

uses the same setting as the drum sound last edited.

1. Click on the desired square.

2. When the shape of the cursor changes to , rotate the mouse wheel to adjust the velocity.

The size of the buttons displayed in Pattern View changes according to the values.

The drum will be played at a high volume.

The drum will be played at a moderately high volume.

The drum will be played at a medium volume.

The drum will be played at a moderately low volume.

The drum will be played at a low volume.

Multiple drum sounds contain; you cannot adjust the velocity for these squares.

* You can use the Zoom bar to set a higher resolution, which then allows you to set the

velocity for each sound.

You can also change the velocity value by using the computer’s keyboard to directly type in a value

from 1 to 127 in the VELOCITY field.

You can also individually adjust the velocity value for each drum sound you input.

You cannot set the velocity in squares in which “---” appears.

To confirm the setting for the currently selected pattern:

1. The number of measures in the currently selected pattern appears in the LENGTH field.

* You can also change the number of measures by using the computer’s keyboard to directly type in a

value in the LENGTH field.

* You can make settings from 1 to 999 measures.

2. Use the TIME SIGNATURE Selection button to select the time signature for the currently

selected pattern.

3. The time signature for the currently selected pattern appears in the TIME SIGNATURE field.