Specifications

6
4. Read in a Song from the BR-800
Data that you’ve edited cannot be saved in the preset data in this Rhythm Editor.
This means that you need to first import the song saved on the BR-800, and this then allows you to save the
song on the BR-800 from Rhythm Editor.
* A song can consist of up to five drum kits, 100 patterns, and five arrangements.
Executing a SONG READ operation causes any data being edited to be discarded.
1. Click the SONG READ button in the COMMON section.
2. Select one song from the displayed Song List, then click [OK].
The song is read into Rhythm Editor, and the song name appears in the Song Name field.
Only one song can be read in at a time.
To adjust the playback tempo:
1. Adjust pattern and arrangement tempos with the TEMPO knob.
* When the tempo is adjusted in this manner, the tempos for all patterns in the arrangement are set
uniformly.
2. The tempo that is currently set is indicated in the TEMPO field.
You can also change the tempo value by using the computer’s keyboard to directly type in a
value from 25.0 to 250.0 in the TEMPO field.
Holding down the Ctrl key as you click the Tempo knob sets the default value (120).
To adjust the volume:
1. Adjust the volume during playback with the VOLUME knob.
* This adjusts the volume for the sounds played using the tone pads as well as the volume of pattern
and arrangement playback.
2. The volume that is currently set is indicated in the VOLUME field.
You can also change the volume value by using the computer’s keyboard to directly type in a value
from 0 to 100 in the VOLUME field.
Holding down the Ctrl key as you click the Volume knob sets the default value (100).
4. Read in a Song from the BR-800
5. COMMON Section
TEMPO field
VOLUME field
TEMPO knob VOLUME knob
* The name of the currently selected song appears in the Song Name field.
SONG READ button
CONNECT/DISCONNECT button Song Name field