Specifications

3
1. Introduction
～ Procedures from Starting Up Rhythm Editor to the Finished Rhythm ～
For more detailed information, see 2. Connecting / Disconnecting the BR-800 (p. 4).
For more detailed information, see 4. Read in a Song from the BR-800 (p. 6).
For more detailed information, see 6. PATTERN Section (p. 7).
For more detailed information, see 7. ARRANGEMENT Section (p. 14).
For more detailed information, see 2. Connecting / Disconnecting the BR-800 (p. 4).
1. Make the connection to the BR-800, then start BR-800 Rhythm Editor.
Connect the BR-800 to your computer
via USB cable.
Start up BR-800 Rhythm Editor.
2. Read in a song from the BR-800.
Read in a song from the BR-800.
* This allows you to edit data
saved to the BR-800 with Rhythm Editor.
Click the SONG READ button!
3. Edit the pattern.
Write the pattern to the BR-800.Edit the pattern.
Click the PATTERN WRITE button!
4. Edit the arrangement.
Write the arrangement to the BR-800.
Edit the arrangement.
Click the ARRANGEMENT WRITE button!
5. Disconnecting the BR-800.
Cancel the USB connection.