Manualshelf

Specifications

ManualsBrandsBoss Audio Systems ManualsDVRBR-800
18192021222324252627
26
Error Messages
Not connected to the BR-800.
Cause: An attempt was made to import a song without being connected to the BR-800.
Solution 1: Press the CONNECT button and make the connection to the BR-800.
Solution 2: Redo the connection to the BR-800.
Could not connect to the BR-800.
Cause: Connection to the BR-800 failed.
Solution 1: Check whether songs can be imported on the BR-800.
Solution 2: Redo the connection to the BR-800.
Multiple connections are available. Use the [CONNECT] button to select one.
Cause: Multiple connection destinations were found.
Solution: Specify the BR-800 drive as the connection target.
The file could not be loaded.
Cause: Song import failed.
Solution 1: Check whether the connection to the BR-800 is correct.
Solution 2: Check whether the original song data to be imported is corrupt.
The song list could not be loaded.
Cause: Acquisition of the Song List failed.
Solution 1: Check whether the connection to the BR-800 is correct.
Solution 2: Check whether the original song data to be imported is corrupt.
No song has been loaded.
Cause: An attempt was made to use song data or save it on the BR-800 without first loading any songs.
Solution: Make sure the connection to the BR-800 is correct, then import the song you want.
Specify a name.
Cause: An attempt was made to save a file on the BR-800 without giving the file a name.
Solution: Assign a name, then save it on the BR-800.
The file could not be saved.
Make sure that the media is not write protected, and that there is sufficient free space.
Cause: Saving on the BR-800 failed.
Solution: Check the setting for the destination to save the file.
The audio device cannot be used.
Cause: No device was found.
Solution: Check the settings on the computer.
Only numerical values and values starting with “P” (Preset Pattern) or “S” (Song Pattern) can be input.
Cause: A letter of the alphabet other than “P” or “S” or another character or symbol was input.
Solution: Redo the input using a value within the range of “P001?P327” or “S001?S100.”
Error Messages