Specifications

17
7. ARRANGEMENT Section
This procedure changes the patterns used in arrangements.
1
Double click the desired Pattern in Arrangement View.
* Click the part within the Pattern that is surrounded by the frame.
2
Enter the desired pattern number using the computer’s keyboard, then press the Enter key to set the
pattern.
* The ranges in which you can change patterns are as follows.
• For preset patterns, P001 through P327
• For song patterns, S001 through S100
・The Pattern View in the PATTERN section is refreshed, and the content of the newly selected
pattern is displayed.
・The length of the last Step within an arrangement is equal to the number of measures in the pattern used.
1
Click the desired Step area in Arrangement View.
2
You can then drag the area and drop it in the desired location.
The selected Step area then moves.
3
Repeat Steps 1–2 to rearrange the pattern sequence.
・Step numbers are refreshed when Step areas are moved.
・The length of the last Step within an arrangement is equal to the number of measures in the pattern used.
7-4. Changing the Pattern To Be Used
7-5. Rearranging the Sequence of the Patterns