User's Manual

E - 26
Bluetooth Operations
Pairing The Bluetooth System Between
Mobile Phone & The Unit
1. Open your Mobile Phone and switch
Bluetooth to on, and search Bluetooth
device.
2. “BT70” should appear in the pairing list on the
Mobile Phone. User need to select “BT70”
and then input the password “0000”, the
below display will be show on TFT:
Tap button to confirmed the
connect.
NOTE
During Pairing, only Power/Mute, Volume
Knob are functional, all the other function
keys are disabled & non-operational
during the pairing mode.
3. If the pairing is successful, the below
display will be flashing on the TFT for 3
seconds. And the unit will switch back to
the previous mode automatically.
If the pairing failed, the below display will be
show on TFT:
Disconnecting of the Bluetooth System
Deleting
User can disconnect the connected Bluetooth
device as follows:
User can delete a paired device if it is no longer
needed as follows:
1. Access into the SETUP MENU of
Bluetooth Menu_Paired (Handfree).
1. Access into the SETUP MENU of
Bluetooth Menu_Paired (Handfree).
2. Tap button access into the
HandFree Device list.
2. Tap button access into the
HandFree Device list.
3. Tap button to disconnect
this device, and the below display will be
sholw on TFT:
3. Tap button to Delete the
device, and the below display will be sholw
on TFT:
Tap button to confirmed the
disconnect.