Specifications

82
TRAILERING & BOAT CARPET
For more information see www.tiedown.com
For more information see www.dutton-lainson.com
For more information see www.cequentgroup.com
TONGUE JACK - 6430
•
1000 lb. capacity
•
8" slotted wheel for added maneuverability
•
1/2" swivel pin
•
Zinc TUFFPLATE finish
•
Jack rotates easily to horizontal towing
position & locks into place
•
Fits trailer tongues up to 3" x 5"
Mfr. No. 22359
ORDER NO. 106-64300
ORDER NO. 141-50032
Mfr. No. 500320
TRAILER ACCESSORIES
6430
ORDER NO. Mfr. No. Description
404-82113 82113 10" Eliminator 10" Disc Brakes
404-82100 82100 12" Eliminator 10" Disc Brakes
404-81251 81251 Replacement Ceramic Brake Pad Kit
ELIMINATOR VENTED DISC BRAKES
“Integral” one piece style vented rotor and aluminum caliper
with automotive quality brake pads
•
Lifetime ceramic pads with stainless steel backing plates.
•
Distinctive 380 aluminum caliper with E-coat finish
•
Vented rotor with GalvX finish
•
Galvanized heavy duty mounting bracket included
•
Stainless steel bleeder valves and slider pins
•
Bimetal piston with Stainless Steel piston cup
•
Aluminum caliper with raised ribs dissipates heat
up to 5 times faster than cast iron calipers
•
Precision bearings, seal and grease factory installed
•
2 kits required per axle
F2 JACK ADAPTER PLATE
Upgrade your Fulton® center-bolt swivel mount
jack to an F2® jack.
•
Fits Fulton’s patented center-bolt design
– used on XP10 and XP15 weld-on jacks
•
Installs easily – no drilling or welding
New
Size
Mfr. No. 141133
ORDER NO. 141-13300
AXLE BRAKE LINE KITS
Add disc or drum brakes to your trailer. All hardware included,
you supply the actuator and brakes. The “Add On” Axle Kit must
be used with the Single Axle Kit. The Tandem Axle Kit combines
both Single Axle and “Add On” Kits into one package.
ORDER NO. Mfr. No. Description
404-80326 80326 Single Axle Brake Line Kit
404-80327 80327 "Add On" Axle Brake Line Kit
404-80328 80328 Tandem Axle Brake Line Kit
XLT TONGUE JACK
XLT is stylized with ergonomic comfort like the F2® series.
•
5 pitch acme screw with corrosion-resistant finish
•
12" screw travel
•
Improved corrosion-resistance with Sharkskin™
on exterior surfaces and ZMax™ clear zinc on acme screw
•
Thermoplastic bushings on inner and outer tubes reduce
“tube drag” when raising and lowering
•
Patented XP bolt-through swivel/mount system
•
1,500 lb.capacity with superior castering performance