Specifications

66
PAINT & FIBERGLASS REPAIR
For more information see www.pettitpaint.com
For more information see www.aquagardboatpaint.com
SPECIALTY EPOXY PRODUCTS
PAINT PRODUCTS
TOPSIDE ENAMELS
•
Commercial grade
•
Can be used on fiberglass, wood,
aluminum & steel
•
Colourfast & UV resistant
•
Hard hi-gloss finish
•
Abrasion & staining resistant
•
Single component enamel
•
Oil & gas resistant
•
Superior colour retention
•
Easy to obtain a smooth finish with brush or roller
180 WASH & DEWAXER
For use on bare fiberglass &
aluminum surfaces
•
Marine grade
•
Formulated to strip mold release agent
from fiberglass surface
•
Removes grease and wax from
gelcoat and aluminum
•
Smooths surface for paint application
•
Two-part multi-purpose epoxy patching & repair compound
•
So versatile, it has been called “The duct tape of the marine world”
•
Excellent for underwater repairs
•
Produces a rock-hard protective surface
•
Provides excellent protection against corrosion of metals
•
Stops erosion and deterioration of concrete or wood
ORDER NO. Mfr. No. Description
353-52001 52001 Light Black (Qt)
353-52002 52002 Light Red (Qt)
353-52003 52003 Dark Blue (Qt)
353-52016 52016 International Orange (Qt)
353-52017 52017 Light Grey (Qt)
353-52018 52018 Medium Grey (Qt)
353-52021 52021 High-Gloss White (Qt)
353-52024 52024 Semi-Gloss White (Qt)
353-52094 52094 Dull Dead Grass (Qt)
ORDER NO. Mfr. No. Size
353-30000 30000 Quart
353-30100 30100 Gallon
ORDER NO. Mfr. No. Kit Size
50788-5001 A-788-SG2 2-Gallon Kit
50788-5002 A-788-HGS 1/2-Gallon Kit
A-788 SPLASH ZONE
Two-Part Epoxy Repair Compound
Extremely hard, abrasion and impact resistant, two-part epoxy patching compound. It applies like putty to seal, fill, patch or rebuild aluminum,
wood, concrete, fiberglass, & steel. It can be applied in or out of water to repair boat hulls, buoys, seawalls, docks, bridge abutments, & more.
Splash Zone provides excellent protection against corrosion of metals and erosion and deterioration of concrete or wood.
Splash Zone’s rock-hard surface can be drilled, tapped, or machined.
Recommended for patching and repairing damaged underwater surfaces.
Not for use in potable water.