Specifications

5
INSTRUMENTATION & ELECTRONICS
860-32904
For more information see www.faria-instruments.com
EURO WHITE™
Design Features:
Perimeter-lighted white dial with
bold black graphics, black alu-
minum bezel, contoured black
pointer, flat glass lens.
Gauge Specifications 12 volt, negative ground, internally illuminated unless otherwise noted.
Sending Unit Information American requires standard American or standard Faria sending unit.
Mounting Information 4” tachometers, speedometers, synchronizers, & compasses - Hole Size: 3.375” / 85mm.
All 2” instruments - Hole Size: 2.0625” /53mm.
Requires
sending unit
on outboard
or stern drive
Transferable Limited Lifetime Warranty
Requires pitot
tube or
connection to
lower drive unit
INSTRUMENT DIAL RANGE DESCRIPTION SENDER SIZE ORDER NO.
Tachometer 6000 RPM For all 4, 6, & 8 cylinder inboard & I/O gas engines Not Required 4" 860-32904
7000 RPM Universal for all outboard engines (4,6,8,10,12, & 20 pole) Not Required 4" 860-32905
Tach / Hourmeter 6000 RPM For all 4, 6, & 8 cylinder inboard & I/O gas engines Not Required 4" 860-32932
Tach + System Check™ 7000 RPM Operator Warning System for ‘96 & newer electric start OMC System 4" 860-32950
Operator Warning System Indicator OMC outboards ( Johnson & Evinrude ) Check™
Speedometer 55 MPH 10 - 55 MPH 4" 860-32909
Pitot Kit Universal speedometer pickup tube kit with hardware 860-91109
Same as above with 20 feet of tubing 860-91106
Fuel Level Gauge E - 1/2 - F American 2" 860-12901
Hourmeter 10,000 Hours Elapsed time in hours / tenths (12-32 volt) not illuminated Not Required 2" 860-12913
Oil Pressure Gauge 80 PSI American 2" 860-12902
Trim Gauge Up - Down Mercury & Mariner outboards, Mercruiser, Volvo DP,
Yamaha 2001 & newer 2"
860-12916
Johnson / Evinrude, Suzuki outboards 2" 860-12915
OMC Cobra & Volvo SX stern drives 2" 860-12917
Honda outboards (May require harness 93100) 2" 860-12989
Voltmeter 10 -16 Volt For all 12 volt electrical systems Not Required 2"
860-12911
Water Pressure Gauge Kit 30 PSI All water cooled outboard & I/O engines Not Required 2" 860-12903
Water Temperature Gauge 100 - 250º F American 2" 860-12904
860-32950 860-12901 860-12916