Specifications

4
INSTRUMENTATION & ELECTRONICS
For more information see www.faria-instruments.com
INSTRUMENT DIAL RANGE DESCRIPTION SENDER SIZE ORDER NO.
Tachometer 6000 RPM For all 4, 6, & 8 cylinder inboard & I/O gas engines Not Required 4" 860-36004
7000 RPM Universal for all outboard engines (4,6,8,10,12, & 20 pole) Not Required 4" 860-36005
Tachometer with Hourmeter 6000 RPM For all 4, 6, & 8 cylinder inboard & I/O gas engines Not Required 4" 860-36032
Tach + System Check™ 7000 RPM Gas, J/E Outboard OMC System 4" 860-36050
Operator Warning System Indicator Check™
Speedometer 35 MPH 55 MPH (Mechanical) 4"
860-36009
55 MPH 65 MPH (Mechanical) 4" 860-36010
Pitot Kit Universal speedometer pickup tube kit with hardware 860-91109
Same as above with 20 feet of tubing 860-91106
Fuel Level Gauge E - 1/2 - F American 2" 860-16001
Hourmeter 10,000 Hours Elapsed time in hours / tenths (12-32 volt) not illuminated Not Required 2" 860-16020
Oil Pressure Gauge 80 PSI American 2" 860-16002
Trim Gauge Up - Down Mercury & Mariner outboards, Mercruiser, Volvo DP,
Yamaha 2001 & newer 2"
860-16016
Johnson / Evinrude, Suzuki outboards 2" 860-16017
Voltmeter 10 -16 Volt For all 12 volt electrical systems Not Required 2" 860-16023
Water Pressure Gauge Kit 30 PSI All water cooled outboard & I/O engines Not Required 2" 860-16003
Water Temperature Gauge 100 - 250º F American 2" 860-16004
INSTRUMENT DIAL RANGE DESCRIPTION SENDER SIZE ORDER NO.
Trim Gauge Up - Down Mercury & Mariner outboards, Mercruiser, Volvo DP,
Yamaha 2001 & newer 2"
860-22003
Johnson / Evinrude, Suzuki outboards 2" 860-22001
Honda outboards (May require harness 93100) 2" 860-22002
Water Pressure Gauge Kit 30 PSI All water cooled outboard & I/O engines Not Required 2" 860-22004
Requires
sending unit
on outboard
or stern drive
Requires
sending unit
on outboard
or stern drive
Requires pitot
tube or
connection to
lower drive unit
Gauge Specifications 12 volt, negative ground, internally illuminated unless otherwise noted.
Sending Unit Information American requires standard American or standard Faria sending unit.
Mounting Information 4” tachometers, speedometers, synchronizers, & compasses - Hole Size: 3.375” / 85mm.
All 2” instruments - Hole Size: 2.0625” /53mm.
Transferable Limited Lifetime Warranty
SPUN SILVER
Design Features:
Perimeter-lighted silver dial with
bold black graphics, polished
stainless steel bezel, contoured
black pointer, & domed glass lens.
860-36005 860-3
3009
PLATINUM™
Design Features:
Polished stainless steel bezel,
domed fog-resistant lens,
perimeter lighted black dial
with white and silver graphics. Or-
ange tipped black pointer