Specifications

25
LIGHTING & ELECTRICAL
BATTERY CHARGER
P12 BATTERY CHARGER LED REMOTE
LED Indicators
•
Charging LED- Quick check for green light confirms charging
•
Charge Stage- Displays charging stage
•
Equalize LED- Indicates the charger is currently in equalization mode
•
Fan Mode- Indicates charger's internal fan mode
•
Charge Output- Displays the percentage of output current for each battery.
Will also indicate maximum output setting when maximum output is adjusted
to accommodate for AC source limitations.
•
Alert- Icon LEDs provide warning and alert status for quick diagnostics
Four Control Buttons
•
Fan- User adjustable settings
•
Dim/ Alarm- Provides adjustment to brightness of LEDs on display as
well as Silence function for alarms.
•
Output- User adjustable charger output when AC source limitations exist
that require lowering the AC current draw.
•
Power- Places P12 Battery Charger into standby mode
ORDER NO. Mfr. No.
738-75200 7520
For more information see www.bluesea.com
For more information see www.bepmarine.com
DIGITAL VOLTAGE SENSING RELAY
DVSR: Dual Battery charging Made Easy
The Digital Voltage Sensing Relay (DVSR) allows the charging of a second battery bank from any single charging source.
When the voltage on the charged bank rises sufficiently, the DVSR engages allowing the 2nd battery bank to charge. When
charging stops and voltage falls, the DVSR automatically isolates the battery banks, ensuring that engine start
batteries are kept fully charged. Digital circuitry provides superior reliability and extremely low power consumption.
•
Safely charge two or more independent battery banks from one charge source (alternator, battery charger…)
•
Charges engine starting batteries before combining auxiliary bank for charging
•
Protects start batteries from becoming flattened by domestic loads
•
Isolates electronics from harmful electrical surges from starter motors
•
Simple to install 3 wire connection, leaves alternator wiring intact
•
No volt drop vs. diode isolators
•
Ignition protected
•
Surface or panel mountable
•
Replaces previous models 710-125A and 710-125A-DS
Dimensions: 2.75"L x 2.75"W x 2"H (69 X 69 X 50 mm)
ORDER NO. Mfr. No. Volts Rating (A) Rating (A) Engages Disengages
Continuous Continuous (V DC) (V DC)
770-71140 710-140A 12/24 125 140 13.4/26.8 12.8/25.6
2011 Digital Enhancements:
•
Multi voltage, auto selects between 12 and 24V DC operation
•
Digital circuits provide very low power consumption and
enhanced performance
•
Remote sensing circuitry allows optional connection from
ignition switch, provides same functionality as single sense
VSR and zero power consumption when engine is off
•
Zero stand by current draw when remote sensing circuit
utilized with storage mode switch fitted (switch in open position)
•
Remote status LED output option
Replaces 710-125A