Service manual

7
MZ-NE410
Note: Follow the disassembly procedure in the numerical order given.
3-2. Case (Lower)
3-3. MAIN Board
1 two screws
(M1.4)
2 two screws
(M1.4)
3 Remove the case (lower) in the
direction of the arrow.
8 MAIN board
6 battery terminal (–)
5 battery terminal board (+
)
2 flexible board (motor)
(CN701)
3 flexible board
(CN872)
7 flexible board (optical pick-up)
(CN501)
1 Remove two solders of the
flexible board (over write head).
4 four screws
(M1.4)