4
INSTRUCTION MANUAL CAR RADIO RECEIVER / MP3 PLAYER WITH BULETOOTH HAND FREE SYSTEM BAND BUTTON MUTE BUTTON LCD DISPLAY DSP C LOUD LOC CANCEL/ MENU AMS SRC BUTTON BUTTON BUTTON INFO EQ POWER AUDIO BUTTON BUTTON BUTTON BUTTON INTRO REPEAT RANDOM 10+/- FOLDER TUNING / PLAY/ UP / DOWN SCAN BUTTON BUTTON SEEK PAUSE BUTTONS UP/DOWN BUTTON BUTTON NEXT/BACK BUTTON DSP C LOUD LOC LOUD TALK BUTTON BUTTON ENCODER VOLUME KNOB INFRARED REMOTE SENSOR C PRESET MEMORY STATION BUTTONS (M1-M6)
INSTALLATION Before final installation, connect the wiring temporarily and make sure it is all working properly. Use only the parts included with the unit to ensure proper installation. The use of unauthorized parts can cause malfunctions. This item must be installed by an authorized dealer in order to keep the warranty vaild. Install the unit where it does not get in the driver's way and cannot injure the passenger if there is a sudden stop, like an emergency stop.
- DIN REAR-MOUNT (METHOD B) Installation using the screw holes on the sides of the unit. Fastening the unit to the factory radio mounting bracket. 1. Select a position where the screw holes of the bracket and the screw holes of the main unit become aligned (are fitted) and tighten the screws at 2 places on each side. 2. Screw 3. Factory radio mounting bracket. 4. Dashboard or Console 5.
DETACHABLE CONTROL PANEL (D.C.P.) Removing The Detachable Control Panel (D.C.P.). RELEASE BUTTON 1. Turn the Power off. 2. Press the Panel Release Button. D.C.P. 3. Remove the D.C.P. Attaching the Detachable Control panel (D.C.P.) 1. 1. Insert the right side of the D.C.P. Into the main unit. NOTE: The D.C.P. Must be attached into the T-Joint. 2. 2. Press the D.C.P. On to the left side of middle of D.C.P. Until a click sound is heard. SH PU CAUTION DO NOT insert the D.C.P from the left side.
ELECTRICAL CONNECTION a. Make sure your car battery is a 12 volt (6 filler caps) negative ground system (if not, a converter will be necessary). b. Before starting wiring connections, disconnect the power supply by removing the fuse from the fuse box. c. Connect the power wire to one of the extra terminals of the fuse box. d. Connect the black ground wire to a metal part of the car. It is important to make good contact. e. Make other wiring connections as shown. f.
EQ BUTTON (PRESET EQUALIZER) DSP OFF->CLASSIC->POP->ROCK At DSP off mode preset equalizer will be controlled by Bass / Treble setting. LOUDNESS BUTTON Use this LOUDNESS control to increase bass output. ENCODER VOLUME KNOB When the Menu function is not activated, rotate this knob to change the volume level. When Menu function is activated, rotate this knob to navigate through different menu items.
AUTO MEMORY STORE/PRESET SCAN BUTTON (AMS) 1.PRESET SCAN: Press AMS button briefly enter Preset Scan mode, it will scan all the preset stations in the memories, you can hear that will stay on each station for about 10 seconds. 2.AUTO MEMORY STORE: Press AMS button long to enter Auto Store mode, this feature will automatically scan the current band and enter up to 6 strongest stations into the 6 preset memories. To stop Auto Store & Scan, press the AMS button again.
MP3/SD/USB OPERATIONS M1)PLAY/PAUSE AND FIRST TRACK BUTTON Press this button briefly to pause MP3 play, press again to release pause. M2)INTRO SCAN BUTTON Press this button to select Intro Scan function, the first 10 seconds of each track will be played sequentially until this button is pressed again, then normal play will resume at the current track.
MMC/SD CARD & USB DEVICE OPERATIONS START THE USB DEVICE MODE 1.The USB socket is accessible as indicated in picture 1.(P.1) 2.Plug in the USB drive / device completely as indicated in picture 2(P.2) and display will show USB-LOAD to indicate that the USB drive / device is being plugged in correctly & the download has begun. 3.Does not matter which source the unit is in (TUNER,SD/MMC,AUX,BT,etc), once a USB drive / device is being plugged into the unit, unit will automatically switch to USB mode. 4.
START THE SD/MMC MODE P.4 1.The SD/MMC card slot is located on top of the front panel as indicated in (P.4). 2. Insert the SD/MMC card into the card slot in the correct direction until a CLICK sound is heard. 3. The display will show SD-MMC to indicate that the SD or MMC card is correctly inserted. Once the SD or MMC card is inserted, the MP3 file will automatically loaded & playback will also start. 4.
MP3 OPERATIONS(MP3/SD/MMC/USB FILES) Loading MP3 File ( MMC/SD/USB Drive) During MP3 play, Current Track Number & Time Elapse of current track will be shown on the LCD. If the disc is ID3 compatible, press BAND button to show the following messages: 1. Music Name SONG . 2. Album Name ALBUM . 3. Artist Name ARTIST . Navigating Through Folders and Tracks There are Four ways to select your favourite folder/tracks. 1.By Track Up/Down Button ( ) Press track up/down button to skip the current tracks. 2.
BLUETOOTH MODE OPERATION INSTRUCTION FOR HANDSFREE FUNCTION 1. PAIR IT WITH YOUR PHONE (PAIRING) Before you use your Car HANDSFREE System, you need to pair it with your mobile phone. 1. The Bluetooth set system on the head unit will automatically go into pairing mode when the POWER turned on . 2. Set your Bluetooth phone to discover the CAR_AUDIO_HF. 3. Your phone will find the CAR_AUDIO_HF. Your phone then asks if you want to pair with it.
4. BLUETOOTH NOTICE Before you start to use our Bluetooth HEAD UNIT , Please pair the unit with your mobile phone completely. Please refer to the section of PAIRING To ensure the best reception for Pairing & Re-connection, please make sure the phone Battery is fully charged when making the pairing or Re-connection. Every time you turn the power on, the unit will automatically re-connect with the mobile phone. By pressing the TALK button the unit will start the Auto-Reconnection .
Specifications for Blue tooth BLUE TOOTH Power Consumption Output Power Frequency Band Range Standard 200mA Max. 0 dBm (Class II) 2.4GHz ~ 2.4835GHz ISM Band 3 meters (free space) Bluetooth 2.0 specification Specifications subject to change without notice. Remark: Our Bluetooth Handsfree System adapts to the Bluetooth spec V2.0 and higher. It is compatible with profiles such as Handsfree profile and Head Set profile.
SPECIFICATIONS RADIO SECTION FM Frequency Range Usable Sensitivity Stereo Separation S/N Ratio 87.5 -108 MHz (EURO) 87.5 -107.9 MHz (USA) Better than 15dB at S/N 30 dB 25 dB at 1KHz 50 dB AM (MW) Frequency Range Usable Sensitivity S/N Ratio 522 -1620 KHz (EURO) 530 -1710 KHz (USA) Better than 45dB 40 dB GENERAL Power Supply Polarity Speaker impedance Power Output DC 11 -14V Negative Ground 4 ohms 50W x 4 REMARK : Specifications subject to change without notice.
