Instruction manual

INSTRUCTIONS
VIDEO SETTING ON TOUCH SCREEN
You c an choose: Brightness, Contrast, Color,
Hue , adjust the image effect according to
your sight. The blue bar will show your level.
Video
mode : When using this
function, the positi
on w ill be darker
on the screen.
Image mode:
You can choose the area in the
broken line on the panel, standard, defined,
soft, according what
you need to choose,
the blue back light will
disappear .
II II
22
INSTRUCTIONS
Calibration to re-gain touch
+Please follow the below instructions to calibrate when there is no touch or
touch is not accurateo
Step 1 :Press the mode button in the unit to switch to DVD mode .
Step 2: Insert a DVD disc, after DVD is loaded , press the stop button " ~ "
(as
show in picture 1.) in the remote short, the uni t will display as show in picture 2.
Picture (1 )
Picture
(2)
Step 3: Press" 8 " in th e remote as show in pictur e (3) , the unit will display
as
show in picture (4)
Picture (3 )
Picture
(4)
Step 4 :Press" ... "button in the remote and then quickly press " T "b utton and you will enter
the touch calibration interface.
Picture ( 5 ) Picture (6)
Step 5: User th e touch pen to touch the center of the cross cursor, the cross cursor will move
from the center to
top left comer, top right comer , right down, left down, when the
cross cursor stop at each comer, touch the center of the cursor. Then the panel will display
OK
and leave the calibration interface and the unit regained touch.
Picture ( 7 )
23