Specifications

Removing the Front Panel
1 Press the release button (1) on
the front panel
.
.
REL
2 Pull off the front panel..
3 Place the front panel into the
protective case provided
.
.
Installing the Front Panel
To install the front panel, insert the panel
into the housing and make sure the panel
is properly installed. If the panel is not
properly seated in the housing, some of
the keys or the display may not function
properly. if this occurs, remove and re-
insert the front panel.
Using the Detachable Front Panel
Precautions when handling
1. Do not drop the front panel.
2. Do not put pressure on the display or
control buttons when removing or
installing the front panel.
3. Do not touch the contacts on the front
panel or on the main unit body. It may
result in poor electrical contact.
4. If any dirt or foreign substances are
present on the contacts, they can be
removed with a clean and dry cloth.
5. Do not expose the front panel to high
temperatures or direct sunlight.
6. Do not allow any volatile liquids such
as benzene, paint thinner or insecticides
to contact the front panel.
7. Do not attempt to disassemble the
front panel.
A. Notes on discs:
B. Notes on CD-Rs (recordable
CDs)/CD-RWs (rewritable CDs):
1. Attempting to use non-standard shape
discs (e.g. square, start, and heart) may
damage the unit. Be sure to use circular
CD discs only for this unit.
2. Do not stick paper or tape, etc, onto
the label side or the recording side of any
discs, as it may cause a malfunction.
Dust, scratches and warped discs may
inhibit playback.
1. Be sure to use discs with following
marks only for the unit to play:
Disc Notes
2. The unit cannot play a CD-R and CD-
RW that is not finalized. (Please refer to
the manual of your CD-R/CD-RW
recorder or CD-R/CD-RW software for
more information on finalization
506CA User’s Manual - page 4