Specifications

2006 F-250/F-350
Super Duty Pickups
45
F-250/F-350 SD PICKUPS
July 2005
F-250/F-350 SD Pickups
Axles
FRONT AXLE SPECIFICATIONS — 4x2
Super Duty
Series/Model F-250/F-350
Make Ford
Max. Rating @ Ground (lbs.) 4850
Axle — Type Twin-I-Beam w/Ball Joint Spindle
— Material Nodular Cast Iron
— Spring Centers (in.) 45.73
Radius Arms — No. 2
— Material Stamped, High-Strength Low-Alloy Steel
Ball Joint Lubed-For-Life Ball Joints
Spindle — Material Nodular Cast Iron Body w/Forged Steel Stem
Wheel Bearings — Type Tapered Roller
FRONT AXLE SPECIFICATIONS — 4x4
Super Duty
Series/Model F-250/F-350
Make Dana 60 Dana Super 60
Axle Ratio 3.73/4.10 4.30
Max. Rating @ Ground (lbs.) 6000
Type Monobeam, Live Spindle
Drive Hotchkiss
Housing — Type Unitized
— Cover Attachment Bolted
Wheel Bearings — Type Tapered Roller
Gears — Type Hypoid
Ring Gear — Pitch Diameter (in.) 9.75 10.0
Pinion — Mounting Above Center
Differential — Type 2-Pinion
— Bearings Tapered Roller
Axle Shaft — Minimum Diameter (in.) 1.356
— Diameter over Splines (in.) 1.47
— No. of Splines (Hub End) 35
Technical Specifications
06_F-250F-350 PU.fm Page 45 Thursday, September 1, 2005 7:59 AM