Thank you for choosing our product! Please read the instructions carefully so you will know how to operate your product properly. If there are any technical questions, please contact: Customer care: (805) 751-4853 & Live chat Online support: www.bossaudio.com/support IMPORTANT Please enter below the Serial No. which is located on the exterior of the product. Retain this information for future reference. Model No. Serial No.
Table of Contents Introduction ......................................................................................................................................... 1 Package Contents .............................................................................................................................. 1 Important ............................................................................................................................................ 2 Mounting .................................
Important Read and understand all instructions before you use your product. If you do not follow the instructions in this manual, we are not responsible for any resulting personal injury or damage to property. This will also void the warranty. Important Safety Precautions • Be sure to observe the following guidelines: - Do not increase speaker volume so high that you cannot hear what is around you. - Use caution or temporarily discontinue use in potentially hazardous situations.
Mounting See the section “Installation Precautions” on page 2. Keep connection cables away from any pinch points, moving parts, or any hot exhausts. Do not install the speakers where they may obstruct the rider’s view or inhibit any safety features on the vehicle (e.g. lights, horns, brake levers, etc.). To ensure security of the mounted speakers, always check the mounting conditions (e.g. clamp fastening) of the speakers before each vehicle ride. 1.
Wiring See the section “Installation Precautions” on page 2. For safety, disconnect the negative terminal of the vehicle battery prior to wiring. Keep connection cables away from any pinch points, moving parts, or any hot exhausts. Secure the connected cables. Reconnect the negative terminal of the vehicle only when all wire connections are correctly and securely made.
Wiring Overview Left speaker (with a built-in amplifier) Right speaker C A B 7.5A fuse Red D Black 3.5mm audio input Battery Vehicle’s metal frame Function knob (On/Off and volume control) A : Connect the power control wires so that the function knob can work as ON/OFF control. See the section “Power Source Connection” for complete power connection instructions. B : Connect the signal input cables to enable the volume control and the 3.5mm audio input.
3. When successfully paired/connected, confirmation tone can be heard. Play audio on your mobile device, and audio will be streamed to this product. Rotate the inline function knob to adjust volume. After pairing, the product will be automatically connected to your mobile device each time the two are turned on. To change Bluetooth source, disconnect the Bluetooth connection on the current mobile device. Then repeat Step 2 above to pair/connect with another mobile device.
Troubleshooting If you have problems using this product, check the following points before you request service. If you still have a problem, contact our technical support. Problem No power Solution Check that power source connection is correctly or securely made. See the section “Power Source Connection” for details. Check that the power ON/OFF wires are correctly or securely connected. See the section “Wiring Overview”. Turn on the vehicle’ ignition switch if power is connected to the ignition switch.
Specifications Bluetooth Bluetooth version ......................................... 5.0 / EDR Bluetooth profiles ......................................... A2DP Bluetooth frequency..................................... 2402 – 2480 MHz Transmission power..................................... <4 dBm Transmission distance ................................. up to 33 ft /10 m (line of sight) Audio Speaker driver ............................................. 3” (76 mm) Speaker impedance.............................
rev 0922 *DISCLAIMER: Basic electrical knowledge and tools are required for the following steps.
