User Manual

- 4 -
Mounting the amplier
You can secure the power amplier in your vehicle using the supplied screws.
1. Find a suitable location in the vehicle to mount the amplier. Make sure there is sufcient air
circulation around the intended mounting location.
2. Secure the amplier as follows:
a. Use the four screw holes on the amplier to
mark the mounting holes on the mounting
surface.
b. Drill the mounting holes in the mounting
surface.
c. Place the amplier in position, and attach
the amplier to the mounting surface using
four supplied screws, spring washers and
plain washers.
Mounting the power/volume knob
Mount the power/volume knob in a safe, easy-to-access location where it will not impede the rider’s
ability to drive safely. Secure the power/volume knob using the supplied zip tie.
Wiring
See the section “Installation Precautions” on page 2.
For safety, disconnect the negative terminal of the vehicle battery prior to wiring.
Keep connection cables away from any pinch points, moving parts, or any hot exhausts.
Secure the connected cables.
Reconnect the negative terminal of the vehicle only when all wire connections are
correctly and securely made.