Installation Guide

Assembly Instructions
St. Tropez Canopy
English SS204E
Before assembly
•
We recommend that time is taken to read the
instructions before starting assembly, then
follow the easy step by step guide.
The instruction sheet is only a guide to
the assembly. Certain items may not be
shown to scale.
•
Check all components prior to assembly
•
This product should be assembled by no
less than two people.
•
Never attempt to erect the assembly in
high winds.
•
Drill components where indicated.
x 2
Drill
Recommended tools for assembly
•
Drill
•
10mm diameter drill bit
•
Hammer
•
10mm spanner
•
Spirit level
•
Step ladder
•
Alan key (provided)
13 Ball finial 3
No. Components Qty.
1 Left track section with wall bracket 1
2 Right track section with wall bracket 1
3 Runner 10
4 Track section 2
5 Centre track section 1
6 Centre track and upper leg 1
7 Left upper leg 1
8 Right upper leg 1
9 Front connecting bar 2
10 Rear connecting bar 2
11 Lower leg 3
12 Curl finial 3
19 Polyester canopy 1
20 Polyester canopy cover 1
14 Foot plate 3
15 Brace
(1675mm) 4
16 Brace
(1605mm) 4
17 Canopy tubes
(1590mm) 2
18 Canopy tubes with push button 10
No. Fixing Kit Qty.
24 16mm screws 4
25 Plastic spacer 3
21 60mm bolts with nuts 3
22 35mm bolt 12
23 10mm bolt 32
26 Wall fixings 12
27 Foot pegs 6
28 Plastic caps 47
1
2
3
12
6
8
5
4
7
11
10
9
13
14
16
17
18
20
15
Caution
When connecting
components that use
the spring button.
Please ensure the
button is properly
located in the hole.
19