Brochure

Toll Free: 1-800-561-3164
boshart.com
Rev. 5.0
9-6
US
Contact your sales rep for any further information
SPIDER TORQUE ARRESTORS
Boshart's spider torque arrestors are easily secured to drop pipes with clamps (not included). They feature a unique wire
guard feature and the casing size is clearly marked for ease of cutting to size.
The suggested clamp for all sizes is 2-SSC8740.
Primary Material: SBR
Part No. Drop Pipe Size Color Well Casing Size Quantity List
Price - AL1 L2
List Price Eective: January 07, 2019
TAS46-10 1" Black 4" to 6" 60 $ 7.21
TAS46-12 1-1/4" Black 4" to 6" 60 $ 6.86
TAS46-15 1-1/2" Black 4" to 6" 60 $ 6.52
TAS46-20 2" Black 4" to 6" 60 $ 6.18
CABLE GUARDS
Boshart's cable guards will keep the power cable from abrading against the well casing. One should be placed at
the pump and one every 15' there after. Each cable guard is 6" in size and has tabs that can be cut to t 5" or 4"
well casing.
Primary Material: Polyethylene
Part No. Design Drop Pipe Size Color Quantity List
Price - AL1 L2
List Price Eective: January 02, 2015
WG-100 Self Clamping 1" Clear 48 $ 2.40
WG-6 Snap In 1" & 1-1/4" Clear 100 $ 1.15
WG-125 Self Clamping 1-1/4" Clear 48 $ 5.22
DROP PIPE COUPLINGS
Boshart's drop pipe couplings are use to connect drop pipes together in well applications.
Part No. Size Tensile
Strength Lbs
Length Quantity List
Price - AL1 L2
List Price Eective: March 30, 2020
304 Stainless Steel,
• NSF/ANSI Standard 372 Certied
These couplings have an inside chamfer on both ends for trouble free starting of threads. They have a separate taper to
ensure a proper watertight seal and ats on the sides for ease of use with a wrench.
Note: All tensile testing results consistently conclude in joint failure due to the elongation of the male threads on the
drop/riser pipe. It is therefor recommended that the installer acquire the male pipe thread load capacity data of the
drop/riser pipe from the pipe manufacturer. The loads must not exceed either the coupling or drop/riser pipe load
capacity. The maximum load bearing weight of the pipe will vary signicantly depending on the pipe material. This data
is only a guide. The nal responsibility for the design of the well lies with the well designer/installer.
28-SSDPC-10 1" 6,500 2-1/2" 10 50 $ 12.75
28-SSDPC-12 1-1/4" 10,000 2-1/2" 10 50 $ 14.94
28-SSDPC-15 1-1/2" 12,000 2-1/2" 10 50 $ 18.88
28-SSDPC-20 2" 12,500 2-1/2" 5 25 $ 22.29
PVC,
These couplings have a wall thickness that is 30% heavier than Schedule 120 to ensure increased strength and
reliability. To be used in well depths no greater than 400'.
28-PDPC-10 1" 2-3/4" 10 100 $ 3.96
28-PDPC-12 1-1/4" 2-3/4" 10 100 $ 4.52
28-PDPC-15 1-1/2" 2-3/4" 10 100 $ 4.91
28-PDPC-20 2" 3" 10 100 $ 6.13