Product Overview

BOSHART INDUSTRIES
Telephone: [phone] - Toll Free: 1-800-561-3164
Fax: [phone] - www.boshart.com
6-3
May 16/14
2-1/2" DIAL PRESSURE GAUGES - LIQUID FILLED - LOWER & CENTER BACK MOUNT
Not For Conveying
Potable Water
• General Purpose - not for use with oxygen • Ideal for use where vibration or pressure pulsation occurs
• Accuracy: +/- 1.5% Full Scale Value • Bourdon Tube
• Brass or Lead Free Brass Connection • Polycarbonate Window
• 304 Stainless Steel Case w/ vent plug • Glycerine Filled
• Ambient Operating Temperature: -4 to 140
◦
F (-20 to 60
◦
C) • Maximum Media Temperature: 140
◦
F (60
◦
C)
• Gauges 15 to 600 PSI are tapped for a Restrictor Screw (not included) 1000 PSI or more are tapped and include Restrictor Screw
NO LEAD DUAL RANGE INCRE- CASE
PART NO.
NO LEAD
PART NO.
PSI
kPa MENTS QTY
1/4" LM 1/4" CBM
PG25-15-GNL
0-15
0-100 0.2 50
PG25-30-GNL
0-30
0-200 0.5 50
PG25-60-GNL
PG25CBM-15-GNL
PG25CBM-30-GNL
PG25CBM-60-GNL
0-60
0-400 1 50
PG25-100-GNL
0-100
0-700 1 50
PG25-160-GNL
0-160
0-1100 2 50
PG25-200-GNL
0-200
0-1400 2 50
PG25-300-GNL
0-300
0-2000 5 50
PG25-400-GNL
0-400
0-2800 5 50
PG25-600-GNL
PG25CBM-100-GNL
PG25CBM-160-GNL
PG25CBM-200-GNL
PG25CBM-300-GNL
PG25CBM-400-GNL
PG25CBM-600-GNL
0-600
0-4000 10 50
LIST DUAL RANGE INCRE- CASE
PART NO.
PART NO.
PSI
kPa MENTS QTY
1/4" LM 1/4" CBM
2-PG25-15-G 0-15 0-100 0.2 50
2-PG25-30-G 0-30 0-200 0.5 50
2-PG25-60-G 0-60 0-400 1 50
2-PG25-100-G 0-100 0-700 1 50
2-PG25-160-G 0-160 0-1100 2 50
2-PG25-200-G 0-200 0-1400 2 50
2-PG25-300-G 0-300 0-2000 5 50
2-PG25-1000-G
2-PG25CBM-1000-G
0-1000
0-7000 20 50
2-PG25-1500-G
0-1500
0-10000 20 50
2-PG25-2000-G
0-2000
0-14000 20 50
2-PG25-3000-G
0-3000
0-20000 50 50
2-PG25-4000-G
0-4000
0-28000 50 50
2-PG25-5000-G
2-PG25CBM-1500-G
2-PG25CBM-2000-G
2-PG25CBM-3000-G
2-PG25CBM-4000-G
2-PG25CBM-5000-G
0-5000 0-35000 50 50
2-PG25-10000-G
2-PG25CBM-10000-G
0-10000
0-70000 100 50
VACUUM GAUGE
2-PGV25-30-G
2-PGV25CBM-30-G
30-0Hg 0.5 50
VACUUM/PRESSURE GAUGE
2-PGC25-30-30-G 2-PGC25CBM-30-30G 2/1 50
2-PGC25-30-150-G
2-PGC25CBM-30150G
30Hg-0-30
30Hg-0-150
10/5 50
IMPORTANT: Liquid Filled Gauges are sealed with a rubber plug to prevent leaking during shipment. Upon
installation the tip of the plug must be cut off to allow the equalization of the internal gauge pressure to the
atmospheric pressure. FAILURE TO DO SO WILL ADVERSELY AFFECT THE FUNCTION OF THE GAUGE.
GLYCERINE TEMPERATURE RATINGS
”BII” gauges are filled with 100% (99.7% min.) glycerine, which starts to become viscous at +17
◦
C. As temp. decreases, the
more viscous glycerine becomes, causing the pointer to move slower to its correct position, it can take several minutes. At -5
◦
C
these ga uges no longer operate. For operating temps. less than -5
◦
C, glyce rine is mixed: 2 parts glycerine with 1 part water
(66.7%), which actually lowers the freezing point of the solution allowing the gauge to be used in temps. as low as -46
◦
C.
Rev. 1.1 US