Brochure

BOSHART INDUSTRIES
Telephone: [phone] - Toll Free: 1-800-561-3164
Fax: [phone] - www.boshart.com
NO LEAD BRONZE PITLESS ADAPTERS
PART MAKE SIZE DROP CASING HOLE SAW WORKING SHIPPING QUANTITY
NO. PIPE SIZE SIZE SIZE LOAD-lbs WGT-lbs CTN CASE
P-100NL SEALWELL 1" 1" 5" - 12" 1-3/4" 2000 3.25 1 18
PA-100NL * BII 1" 1" 5" - 12" 1-3/4" 2000 2.95 1 16
PA-800NL BII 1" 1" 5" - 12" 1-3/4" 900 2.91 1 16
PA-125NL * BII 1-1/4" 1-1/4" 5" - 12" 2-1/8" 2000 4.90 1 10
PA-200NL * BII 2" 2" 5-5/8" - 12" 3-1/8" 5000 14.25 1 4
Note: 1-1/2" Pitless Adapter available in stainless steel (P-150SS) *
PRESSURIZED PITLESS ADAPTERS
• For installations requiring a pressurized point of attachment. A s mall hole between the internal
and external gaskets ensures positive pressure at the seal to the well casing. Pressurized
pitless are stamped with a “P” on the top of the slide portion of the pitless for identification
after insta lla tion
• Approved for use in the State of Illinois
PART NO. SIZE DROP PIPE WELL CASING HOLE SAW WORKING SHIPPING QUANTITY
CONNECTION SIZE RANGE SIZE LOAD-lbs WGT-lbs CTN CASE
PA-100-PNL * 1" 1" 5" - 12" 1-3/4" 2000 2.95 1 16
PA-125-PNL * 1-1/4" 1-1/4" 5" - 12" 2-1/8" 2000 4.90 1 10
STAINLESS STEEL PITLESS ADAPTERS
*
• #304 Stainless Steel
• Large gasket for more efficient sealing on casing
• Chamfered slide for easy installation
PART MAKE SIZE DROP CASING HOLE SAW WORKING SHIPPING QUANTITY
NO. PIPE SIZE SIZE SIZE LOAD-lbs WGT-lbs CTN CASE
P-100-SS * BII 1" 1" 5" - 12" 1-3/4" 6000 3.25 1 18
P-125-SS * BII 1-1/4" 1-1/4" 5" - 12" 2-1/8" 6000 4.90 1 8
P-150-SS * BII 1-1/2" 1-1/2" 5" - 12" 2-1/2" 6000 9.42 1 4
P-200-SS * BII 2" 2" 5" - 12" 3-1/8" 6000 13.30 1 4
DOUBLE DROP PIPE PITLESS ADAPTER
PART MAKE DROP CASING HOLE SAW WORKING SHIPPING QUANTITY
NO. PIPE SIZE SIZE SIZE LOAD-lbs WGT-lbs CTN CASE
PA-2XNL * BII 1" & 1-1/4" 4 1/2" - 12" 1-3/4" & 2-1/8" 2000 8.60 1 6
*
TAPPED PITLESS ADAPTERS - FOR UNDERGROUND TANKS / DIRTY WATER
PART NO. SIZE TAPPING QUANTITY
CTN CASE
• 1" Tapped Pitless are for underground water well tank installations. The 1/4" FPT tapping
provides a means to connect poly tubing to the pressure switch which is located near the buried tank.
P-100-SS-T 1" Stainless Steel 1/4" 1 16
Also available:
• 1-1 /4" and 2" Tapped Pitless are for dirty water applications. The 1/4" FPT tapping provides
a means to connect a 1/4" pipe to the pitless to allow easy removal of the pitless unit and pump.
The pipe is guided by a rail/guide system that aligns the pitless el bow with the pitless slide
when reinstall ing (railing or guide system not included).
1-1/4" units are used with grinder pumps
P-125-SS-T 1-1/4" Stainless Steel 1/4" 1 8
2" units are used with all other sewage pumps
P-200-SS-T 2" Stainless Steel 1/4" 1 4