Submittal Sheet

BOSHART INDUSTRIES
Telephone: [phone] - Toll Free: 1-800-561-3164
Fax: [phone] - www.boshart.com
STAINLESS STEEL UNION TANK TEES WITH PTFE (polytetrafluoroethylene) SEAL
Boshart recommends -
Using both Gray Stainless Steel PTFE Tape & Gray Magic Pipe Thread
Compound together for joining stainless steel threaded connections.
• Heavy duty 304 Stainless Steel castings
07ST-8-2U
• Ensures a watertite connection
• Provides a lead free option
• High corrosion resistance
• Replacement PTFE washers available for 1" P/N 07PT-TW10,
for 1-1/4" P/N 07PT-TW12
PART TANK IN-LINE CENTRE DRAIN/RELIEF ACCESSORY QUANTITY
NO. CONNECTION CONNECTION END LENGTH PORTS PORTS
CTN CASE
07ST-25S-2U 1" MPT 1" MPT X 3/4" FPT 4-1/2" (2) 1/2" FPT (2) 1/4" FPT 6 24
07ST-8-2U 1" MPT 1" MPT X 3/4" FPT 7-1/2" (2) 1/2" FPT (2) 1/4" FPT 6 24
07ST-25-2U 1" MPT 1" MPT X 3/4" FPT 10" (2) 1/2" FPT (2) 1/4" FPT 3 12
07ST-14X1-2U 1" MPT 1" MPT X 3/4" FPT 13" (2) 1/2" FPT (2) 1/4" FPT 3 12
07ST-13S-2U 1-1/4" MPT 1-1/4" MPT X 1" FPT 4-1/2" (2) 3/4" FPT (2) 1/4" FPT 4 16
07ST-13-2U 1-1/4" MPT 1-1/4" MPT X 1" FPT 13" (2) 3/4" FPT (2) 1/4" FPT 2 8
NON-UNION STAINLESS STEEL TANK TEES
Boshart recommends -
Using both Gray Stainless Steel PTFE Tape & Gray Magic Pipe Thread
Compound together for joining stainless steel threaded connections.
Heavy duty 304 investment cast stainless steel head casting c/w permanently
Installed Sch. 40 S.S. pipe nipple leg provide top quality construction.
• Permanent hard setting thread sealant ensures a watertight connection, and
secures nipple in tank tee head, it will not un-thread if the tank tee needs to be
removed to replace a defective pressure tank.
• Provides high corrosion resistance
• An excellent “Lead-Free” alternative
PART TANK LINE CENTRE DRAIN/RELIEF ACCESSORY QUANTITY
NO. CONNECTION CONNECTION END LENGTH PORTS PORTS CTN CASE
07ST-25SFH-2 1" FPT* 1" MPT X 3/4" FPT 1-11/16" (2) 1/2" FPT (2) 1/4" FPT 5 40
07ST-25S-2 1" MPT 1" MPT X 3/4" FPT 4-1/2" (2) 1/2" FPT (2) 1/4" FPT 6 24
07ST-8-2 1" MPT 1" MPT X 3/4" FPT 7-1/2" (2) 1/2" FPT (2) 1/4" FPT 4 32
07ST-25-2 1" MPT 1" MPT X 3/4" FPT 10" (2) 1/2" FPT (2) 1/4" FPT 3 12
07ST-14X1-2 1" MPT 1" MPT X 3/4" FPT 13" (2) 1/2" FPT (2) 1/4" FPT 3 12
07ST-13SFH-2 1-1/4" FPT* 1-1/4" MPT X 1" FPT 1-7/8" (2) 3/4" FPT (2) 1/4" FPT 4 32
07ST-13S-2 1-1/4" MPT 1-1/4" MPT X 1" FPT 4-1/2" (2) 3/4" FPT (2) 1/4" FPT 4 24
07ST-13-2 1-1/4" MPT 1-1/4" MPT X 1" FPT 13" (2) 3/4" FPT (2) 1/4" FPT 2 8
07ST-16-2 1-1/4" MPT 1-1/4" MPT X 1" FPT 16" (2) 3/4" FPT (2) 1/4" FPT 3 12
* The FPT tank connection is machined oversized to ensure the pipe nipple threads completely into the head casting leaving no exposed
threads.
GALVANIZED MALLEABLE IRON TANK TEES
• Heavy duty malleable iron castings
• Thick galvanized coating for corrosion resistance 07HC100G
• Compact and economical
PART TANK IN-LINE DRAIN/RELIEF ACCESSORY QUANTITY
NO. CONNECTION CONNECTION PORTS PORTS CTN CASE
07HC100G 1" FPT 1" FPT (1) 3/4" FPT (2) 1/4" FPT 1 30
07HC125G 1-1/4" FPT 1-1/4" FPT (1) 3/4" FPT (2) 1/4" FPT 1 20
PVC TANK TEES
• PVC Material
• One-Piece Molded
• Complies with ASTM Socket & ANSI Threaded Standards
• Recommended working pressure 145 PSI
PART TANK IN-LINE CENTRE DRAIN/RELIEF ACCESSORY QUANTITY
NO. CONNECTION CONNECTION END PORTS PORTS
CTN CASE
LENGTH
07-IC125 1-1/4" MPT X 1" F 1" MPT X 3/4" FPT 3-5/8" (1) 3/4" FPT (2) 1/4" FPT 65
(1) 1/2" FPT
07PT-25-2 1" MPT 1" MPT X 3/4" Socket 11" (2) 1/2" FPT (2) 1/4" FPT 1 60