Brochure
Table Of Contents
- Section 5: FILTRATION PRODUCTS
- FILTRATION PRODUCTS
- IMPORTANT FILTRATION FACTS
- INSTALLATION / MAINTENANCE INFORMATION
- STANDARD HOUSING PACKAGE
- 5" STANDARD HOUSING PACKAGE
- VALVE-IN-HEAD PACKAGE
- DELUXE FILTER HOUSING PACKAGE
- HIGH TEMPERATURE HOUSING PACKAGE
- EXTREME TEMP. / PRESSURE SINGLE TUBE STAINLESS STEEL HOUSING PACKAGE
- GIANT HOUSING PACKAGE
- GIANT HIGH TEMPERATURE HOUSINGS
- GIANT HOUSINGS
- PLEATED POLYESTER CARTRIDGES
- SPUN POLYPROPYLENE GRADIENT DEPTH CARTRIDGES
- GIANT SPUN POLYPROPYLENE GRADIENT DEPTH CARTRIDGES
- STRING WOUND ``FDA'' POLYPROPYLENE CARTRIDGE
- 300F HIGH TEMP. STRING WOUND COTTON CARTRIDGES
- 300F HIGH TEMP. STRING WOUND NATURAL COTTON CARTRIDGES
- CARBON BLOCK (BRIQUETTE) CARTRIDGES
- CARBON BRIQUETTE 'CYST REMOVAL' CARTRIDGES
- POWDER ACTIVATED CARBON WRAP CARTRIDGES
- GRANULAR ACTIVATED CARBON CARTRIDGES
- ICEMAKER / IN-LINE TASTE & ODOUR FILTERS
- BII STANDARD SPIN-OUT FILTERS
- ``T'' STANDARD FILTER HOUSINGS AND COMPLETE UNITS
- ``T' STANDARD FILTER HOUSINGS AND COMPLETE UNITS
- IN-LINE ``T'' SAND SEPARATORS
- IN-LINE ``T' SAND SEPARATORS
- COMBO FILTER HOUSINGS
- COMBO SAND SEPARATORS
- HOT WATER/CHEMICAL RESISTANT SEDIMENT FILTERS
- HIGH TEMP HOUSING / FILTER ELEMENTS
- ACCESSORIES/REPLACEMENT PARTS
- POLYESTER MESH FILTER ELEMENTS FOR ``T'' & COMBO FILTERS
- 316 STAINLESS STEEL MESH FILTER FOR ``T'' & COMBO FILTERS
- POLYESTER MESH SAND SEPARATOR ELEMENTS FOR ``T'' & COMBO FILTERS
- 316 STAINLESS STEEL MESH SAND SEPARATOR ELEMENTS FOR ``T'' & COMBO FILTERS
BOSHART INDUSTRIES
Telephone: 1-519-595-4444 - Toll Free: 1-800-561-3164
Fax: 1-519-595-4380 - www.boshart.com
5-17
December 4/15
COMBO SAND SEPARATORS
COMBO STYLE SAND SEPARATOR FILTERS
• Has all the same features as Combo Style Screen Filters.
• “Spin-out” action separates heavier than water particles away from screen into the
collection chamber. Both the 1-1/2" and 2" use the same fil ter bowl as the standard
filters with a specially designed separator filter element which leaves the bottom half
of the filter bowl open to provide a larger capacity collection chamber.
• The separation of the filtrate from the filter element compartment greatly reduces the
abrasion on the filter element increasing its life span.
• Screen portion of element removes lighter than water particles T Style Screen Filters
• Purge Valve and PTFE Tape included
• 150 PSI Maximum Working Pressure
• Maximum Operating Temperature 100
◦
F (38
◦
C)
• Water Use Only
WARNING: HAND TIGHTEN ONLY - USE OF TOOLS VOIDS WARRANTY
PART NO. LIST PART NO. LIST INLET/ MESH MICRON OPENING FLOW LENGTH WIDTH
PRICE-A PRICE-A OUTLET GPM IN IN
43-H15C Housing Only 98.33 1-1/2" x 1-1/2"
SAND SEPARATOR FILTER COMPLETE WITH STRAINER ELEMENT
POLYESTER MESH 316 STAINLESS STEEL MESH
43-H15C-SPM024 158.35 1-1/2" x 1-1/2" 24 711 0.028 10-50 13-3/4 5-1/4
43-H15C-SPM030 158.35 43-H15C-SSM030 171.60 1-1/2" x 1-1/2" 30 533 0.021 10-50 13-3/4 5-1/4
43-H15C-SPM040 158.35 1-1/2" x 1-1/2" 40 381 0.015 10-50 13-3/4 5-1/4
43-H15C-SPM060 159.53 43-H15C-SSM060 174.34 1-1/2" x 1-1/2" 60 254 0.010 10-50 13-3/4 5-1/4
43-H15C-SPM100 159.53 43-H15C-SSM100 176.48 1-1/2" x 1-1/2" 100 152 0.0 06 10-50 13-3/4 5-1/4
43-H15C-SPM140 159.53 43-H15C-SSM140 178.85 1-1/2" x 1-1/2" 140 104 0.0 04 10-50 13-3/4 5-1/4
43-H15C-SSM200 180.33 1-1/2" x 1-1/2" 200 74 0.0029 10-50 13-3/4 5-1/4
43-H15C-SPM250 162.20 1-1/2" x 1-1/2" 250 61 0.0024 10-50 13-3/4 5-1/4
43-H15C-SPM500 162.20 1-1/2" x 1-1/2" 500 30 0.0012 10-50 13-3/4 5-1/4
43-H15C-SPM1000 162.2 0 1-1/2" x 1-1/2" 1000 15 0.006 10-50 13-3/4 5-1/4
43-H20C Housing Only 158.73 2" x 2"
SAND SEPARATOR FILTER COMPLETE WITH STRAINER ELEMENT
POLYESTER MESH 316 STAINLESS STEEL MESH
43-H20C-SPM024 241.36 2" x 2" 24 711 0.028 18-100 17-7/8 5-1/2
43-H20C-SPM030 241.36 43-H20C-SSM030 254.46 2" x 2" 30 533 0.021 18-100 17-7/8 5-1/2
43-H20C-SPM040 241.36 2" x 2" 40 381 0.015 18-100 17-7/8 5-1/2
43-H20C-SPM060 243.58 43-H20C-SSM060 257.35 2" x 2" 60 254 0.010 18-100 17-7/8 5-1/2
43-H20C-SPM100 243.58 43-H20C-SSM100 261.05 2" x 2" 100 152 0.006 18-100 17-7/8 5-1/2
43-H20C-SPM140 243.58 43-H20C-SSM140 263.94 2" x 2" 140 104 0.004 18-100 17-7/8 5-1/2
43-H20C-SSM200 266.08 2" x 2" 200 74 0.0029 18-100 17-7/8 5-1/2
43-H20C-SPM250 247.06 2" x 2" 250 61 0.0024 18-100 17-7/8 5-1/2
43-H20C-SPM500 247.06 2" x 2" 500 30 0.0012 18-100 17-7/8 5-1/2
43-H20C-SPM1000 247.0 6 2" x 2" 1000 15 0.006 18-100 17-7/8 5-1/2
Rev. 4.1
CDN