Brochure
Table Of Contents
- Section 5: FILTRATION PRODUCTS
- FILTRATION PRODUCTS
- IMPORTANT FILTRATION FACTS
- INSTALLATION / MAINTENANCE INFORMATION
- STANDARD HOUSING PACKAGE
- 5" STANDARD HOUSING PACKAGE
- VALVE-IN-HEAD PACKAGE
- DELUXE FILTER HOUSING PACKAGE
- HIGH TEMPERATURE HOUSING PACKAGE
- EXTREME TEMP. / PRESSURE SINGLE TUBE STAINLESS STEEL HOUSING PACKAGE
- GIANT HOUSING PACKAGE
- GIANT HIGH TEMPERATURE HOUSINGS
- GIANT HOUSINGS
- PLEATED POLYESTER CARTRIDGES
- SPUN POLYPROPYLENE GRADIENT DEPTH CARTRIDGES
- GIANT SPUN POLYPROPYLENE GRADIENT DEPTH CARTRIDGES
- STRING WOUND ``FDA'' POLYPROPYLENE CARTRIDGE
- 300F HIGH TEMP. STRING WOUND COTTON CARTRIDGES
- 300F HIGH TEMP. STRING WOUND NATURAL COTTON CARTRIDGES
- CARBON BLOCK (BRIQUETTE) CARTRIDGES
- CARBON BRIQUETTE 'CYST REMOVAL' CARTRIDGES
- POWDER ACTIVATED CARBON WRAP CARTRIDGES
- GRANULAR ACTIVATED CARBON CARTRIDGES
- ICEMAKER / IN-LINE TASTE & ODOUR FILTERS
- BII STANDARD SPIN-OUT FILTERS
- ``T'' STANDARD FILTER HOUSINGS AND COMPLETE UNITS
- ``T' STANDARD FILTER HOUSINGS AND COMPLETE UNITS
- IN-LINE ``T'' SAND SEPARATORS
- IN-LINE ``T' SAND SEPARATORS
- COMBO FILTER HOUSINGS
- COMBO SAND SEPARATORS
- HOT WATER/CHEMICAL RESISTANT SEDIMENT FILTERS
- HIGH TEMP HOUSING / FILTER ELEMENTS
- ACCESSORIES/REPLACEMENT PARTS
- POLYESTER MESH FILTER ELEMENTS FOR ``T'' & COMBO FILTERS
- 316 STAINLESS STEEL MESH FILTER FOR ``T'' & COMBO FILTERS
- POLYESTER MESH SAND SEPARATOR ELEMENTS FOR ``T'' & COMBO FILTERS
- 316 STAINLESS STEEL MESH SAND SEPARATOR ELEMENTS FOR ``T'' & COMBO FILTERS
BOSHART INDUSTRIES
Telephone: 1-519-595-4444 - Toll Free: 1-800-561-3164
Fax: 1-519-595-4380 - www.boshart.com
5-13
December 4/15
“T” STANDARD FILTER HOUSINGS AND COMPLETE UNITS
T STYLE SCREEN FILTERS
• Available in 3 /4" FPT, 1" , 1-1/2" & 2" Slip - Inlet/Outlet connections
• 180 degree in-li ne “T” style installation
• Increased effective screen area
• 150 PSI Maximum Working Pressure
• Maximum Operating Temperature 100
◦
F (38
◦
C)
• Purge Valve and PTFE(polytetrafluoroethylene) Tape included with housing
• Water Use Only
• Housings - 10 per carton
WARNING: HAND TIGHTEN ONLY - USE OF TOOLS VOIDS WARRANTY
PART NO. LIST PART NO. LIST INLET/ MESH MICRON OPENING FLOW LENGTH WIDTH
PRICE-A PRICE-A OUTLET GPM IN IN
FPT X FPT
43-H07T Housing Only 69.41 3/4" x 3/4"
FILTER UNITS COMPLETE WITH FILTER ELEMENT
POLYESTER MESH 316 STAINLESS STEEL MESH
43-H07T-EPM024 92.23 3/4" x 3/4" 24 711 0.028 1-25 8-1/2 5
43-H07T-EPM030 92.23 43-H07T-ESM030 102.6 7 3/4" x 3/4" 30 533 0.021 1 -25 8-1/2 5
43-H07T-EPM040 92.23 3/4" x 3/4" 40 381 0.015 1-25 8-1/2 5
43-H07T-EPM060 92.67 43-H07T-ESM060 104.3 7 3/4" x 3/4" 60 254 0.010 1 -25 8-1/2 5
43-H07T-EPM100 91.07 43-H07T-ESM100 105.2 6 3/4" x 3/4" 100 152 0.006 1-25 8-1/2 5
43-H07T-EPM140 91.07 43-H07T-ESM140 106.8 1 3/4" x 3/4" 140 104 0.004 1-25 8-1/2 5
43-H07T-ESM200 108.07 3/4" x 3/4 " 200 74 0.0029 1-25 8-1/2 5
43-H07T-EPM250 95.49 3/4" x 3/4" 250 61 0.0024 1-25 8-1/2 5
43-H07T-EPM500 95.49 3/4" x 3/4" 500 30 0.0012 1-25 8-1/2 5
43-H07T-EPM1000 95.49 3/4" x 3/4" 1000 15 0.006 1-25 8-1/2 5
SLIP X SLIP
43-H10T Housing Only 71.32 1" x 1"
FILTER UNITS COMPLETE WITH FILTER ELEMENT
POLYESTER MESH 316 STAINLESS STEEL MESH
43-H10T-EPM024 92.23 1" x 1" 24 711 0.028 1-25 8-1/2 5
43-H10T-EPM030 92.23 43-H10T-ESM030 102.6 7 1" x 1" 30 533 0.021 1-25 8-1/2 5
43-H10T-EPM040 90.03 1" x 1" 40 381 0.015 1-25 8-1/2 5
43-H10T-EPM060 91.07 43-H10T-ESM060 104.3 7 1" x 1" 60 254 0.010 1-25 8-1/2 5
43-H10T-EPM100 91.07 43-H10T-ESM100 105.2 6 1" x 1" 100 152 0.006 1-25 8-1/2 5
43-H10T-EPM140 91.07 43-H10T-ESM140 106.8 1 1" x 1" 140 104 0.004 1-25 8-1/2 5
43-H10T-ESM200 112.39 1" x 1" 200 74 0.0029 1-25 8-1/2 5
43-H10T-EPM250 95.49 1" x 1" 250 61 0.0024 1-25 8-1/2 5
43-H10T-EPM500 94.31 1" x 1" 500 30 0.0012 1-25 8-1/2 5
43-H10T-EPM1000 95.49 1" x 1" 1000 15 0.006 1-25 8-1/2 5
Rev. 4.1
CDN