Manualshelf

Submittal Sheet

ManualsBrandsBoshart ManualsMelt-Blown Filters1 Micron 20" Giant Spun Poly
1
25 Whaley Avenue, PO Box 310, Milverton, ON CANADA N0K 1M0
Tel: 519-595-4444 Fax: 519-595-4380 Toll Free: 800-561-3164
www.boshart.com
© 2018 Boshart Industries Inc. All Rights Reserved.
BII-14-(G)SP-0418(1284)
14-(G)SP SERIES
SPUN POLYPROPYLENE
SEDIMENT CARTRIDGE
DIMENSIONS
Part No.
Inner Diameter Outer Diameter Length Micron Flow Rate Weight
inches inches inches Rating PSI Drop @ GPM grams
STANDARD
14-SP1-01 1-1/8" 2-1/2" 9-7/8" 1 1 PSI @ 3 GPM 130
14-SP1-05 1-1/8" 2-1/2" 9-7/8" 5 1 PSI @ 5 GPM 130
14-SP1-05-2PK 1-1/8" 2-1/2" 9-7/8" 5 1 PSI @ 5 GPM 260
14-SP1-10 1-1/8" 2-1/2" 9-7/8" 10 1 PSI @ 10 GPM 130
14-SP1-25 1-1/8" 2-1/2" 9-7/8" 25 1 PSI @ 12 GPM 130
14-SP1-25-2PK 1-1/8" 2-1/2" 9-7/8" 25 1 PSI @ 12 GPM 260
14-SP1-50 1-1/8" 2-1/2" 9-7/8" 50 1 PSI @ 17 GPM 130
14-SP2-01 1-1/8" 2-1/2" 20" 1 1 PSI @ 6 GPM 290
14-SP2-05 1-1/8" 2-1/2" 20" 5 1 PSI @ 10 GPM 290
14-SP2-10 1-1/8" 2-1/2" 20" 10 1 PSI @ 20 GPM 290
14-SP2-25 1-1/8" 2-1/2" 20" 25 1 PSI @ 30 GPM 290
14-SP2-50 1-1/8" 2-1/2" 20" 50 1 PSI @ 35 GPM 290
GIANT
14-GSP1-01 1-1/8" 4-1/2" 10" 1 1 PSI @ 10 GPM 480
14-GSP1-05 1-1/8" 4-1/2" 10" 5 1 PSI @ 15 GPM 480
14-GSP1-10 1-1/8" 4-1/2" 10" 10 1 PSI @ 20 GPM 480
14-GSP1-25 1-1/8" 4-1/2" 10" 25 1 PSI @ 25 GPM 480
14-GSP2-01 1-1/8" 4-1/2" 20" 1 1 PSI @ 15 GPM 960
14-GSP2-05 1-1/8" 4-1/2" 20" 5 1 PSI @ 25 GPM 960
14-GSP2-10 1-1/8" 4-1/2" 20" 10 1 PSI @ 30 GPM 960
14-GSP2-25 1-1/8" 4-1/2" 20" 25 1 PSI @ 35 GPM 960
Application:
■
Melt blown gradient manufacturing process provides
superior lter efciency, pressure drop and lter life
■
Gradient four (4) layer (outside-in), varied micron lter
structure effectively captures particles largest to smallest
■
Suitable for residential, commercial and industrial applications
■
Good chemical resistance and not prone to bacterial attack
Specication:
■
Max Temperature Rating: 125°F (52°C)
■
Filter media: 100% melt-blown micron-denier polypropylene bre
Certication:
■
NSF/ANSI Standard 42 Certied
This Filter Cartridge is Tested and Certied
by NSF International against NSF/ANSI
Standard 42 for material requirements only.
NSF/ANSI Standard 42 - Drinking Water Treatment Units (Aesthetic Effects) - Covers point-of-use and pint-of-entry (POU / POE) systems designed to reduce specic aesthetic, or
non-health effects contaminants (chlorine, TDS, particulates) that may be found in drinking water that is considered to be microbiologically safe.
Always Test Water - Do not use this product with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the ltration system.
Change Out - Replacement lter cartridges have a limited service life. Changes in taste, colour and ow of the water (other liquid) being ltered are signals that replacement of
the cartridge may be necessary.

Summary of content (1 pages)