Selection Guide

5-14
January 7/19
BOSHART INDUSTRIES
Telephone: [phone] - Toll Free: 1-800-561-3164
Fax: [phone] - www.boshart.com
“T’ STANDARD FILTER HOUSINGS AND COMPLETE UNITS (cont’d)
PART NO. LIST PART NO . LIST INLET/ MESH MICRON OPENING FLOW LENGTH WIDTH
PRICE-A PRICE-A OUTLET GPM IN IN
SLIP X SLIP
43-H15T Housing Only 74.12 1-1/2" x 1-1/2"
FILTER UNITS COMPLETE WITH FILTER ELEMENT
POLYESTER MESH 316 STAINLESS STEEL MESH
43-H15T-EPM024 92.26 1-1/2" x 1-1/2" 24 711 0.028 10-50 13-3/4 5-1/4
43-H15T-EPM030 91.98 43-H15T-ESM030 107.77 1-1/2" x 1-1/2" 30 533 0.021 10-50 13-3/4 5-1/4
43-H15T-EPM040 91.98 1-1/2" x 1-1/2" 40 381 0.015 10-50 13-3/4 5-1/4
43-H15T-EPM060 95.74 43-H15T-ESM060 113.84 1-1/2" x 1-1/2" 60 254 0.010 10-50 13-3/4 5-1/4
43-H15T-EPM100 95.74 43-H15T-ESM100 116.32 1-1/2" x 1-1/2" 100 152 0.006 10-50 13-3/4 5-1/4
43-H15T-EPM140 95.74 43-H15T-ESM140 119.36 1-1/2" x 1-1/2" 140 104 0.004 10-50 13-3/4 5-1/4
43-H15T-ESM200 121.45 1-1/2" x 1-1/2" 200 74 0.0029 10-50 13-3/4 5-1/4
43-H15T-EPM250 98.85 1-1/2" x 1-1/2" 250 61 0.0024 10-50 13-3/4 5-1/4
43-H15T-EPM500 98.85 1-1/2" x 1-1/2" 500 30 0.0012 10-50 13-3/4 5-1/4
43-H15T-EPM1000 98.85 1-1/2" x 1-1/2" 1000 15 0.006 10-50 13-3/4 5-1/4
43-H20T Housing Only 115.67 2" x 2"
FILTER UNITS COMPLETE WITH FILTER ELEMENT
POLYESTER MESH 316 STAINLESS STEEL MESH
43-H20T-EPM024 149.34 2" x 2" 24 711 0.028 18-100 17-7/8 5-1/2
43-H20T-EPM030 149.34 43-H20T-ESM030 168.93 2" x 2" 30 533 0.021 18-100 17-7/8 5-1/2
43-H20T-EPM040 149.34 2" x 2" 40 381 0.015 18-100 17-7/8 5-1/2
43-H20T-EPM060 153.40 43-H20T-ESM060 173.38 2" x 2" 60 254 0.010 18-100 17-7/8 5-1/2
43-H20T-EPM100 153.40 43-H20T-ESM100 177.34 2" x 2" 100 152 0.006 18-100 17 -7/8 5-1/2
43-H20T-EPM140 153.40 43-H20T-ESM140 182.14 2" x 2" 140 104 0.004 18-100 17 -7/8 5-1/2
43-H20T-ESM200 185.54 2" x 2" 200 18-100 17-7/8 5-1/2
43-H20T-EPM250 158.16 2" x 2" 250 61 0.0024 18-100 17-7/8 5-1/2
43-H20T-EPM500 158.16 2" x 2" 500 30 0.0012 18-100 17-7/8 5-1/2
43-H20T-EPM1000 158.16 2" x 2" 1000 15 0.006 18-100 17-7/8 5-1/2
IN-LINE “T” SAND SEPARATORS
T STYLE SAND SEPARATORS FIlTERS
• Has all the same features as T Style Screen Filters
• “Spin-out” action separates heavier than water particles away from screen into the collection
chamber. The 3/4" & 1" models utilize a special extended bowl to create the collection
chamber, the 1-1/2" & 2" models use the same filter bowl as the standard filters with a specially
designed separator filter element which leaves the bottom half of the filter b owl open to provide
a larger capacity collection chamber.
• The separation of the filtrate from the filter element compartment greatly reduces the abrasion
on the filter element increasing its life span.
• Screen portion of element removes lighter than water particles T Style Screen Filters
• Purge Valve and PTFE Tape included with housing
• 150 PSI Maximum Working Pressure
• Maximum Operating Temperature 100
◦
F (38
◦
C)
• Water Use Only
• Housings - 10 per carton
WARNING: HAND TIGHTEN ONLY - USE OF TOOLS VOIDS WARRANTY
PART NO. LIST PART NO. LIST INLET/ MESH MICRON OPENING FLOW LENGTH WIDTH
PRICE-A PRICE-A OUTLET GPM IN IN
FPT X FPT
43-H07S Housing Only 73.11 3/4" x 3/4"
FILTER UNITS COMPLETE WITH FILTER ELEMENT
POLYESTER MESH 316 STAINLESS STEEL MESH
43-H07S-SPM024 90.20 3/4" x 3/4" 24 711 0.028 1-25 11-1/2 5
43-H07S-SPM030 90.20 43-H07S-SSM030 99.69 3/4" x 3/4" 30 533 0.021 1-25 11-1/2 5
43-H07S-SPM040 90.20 3/4" x 3/4" 40 381 0.015 1-25 11-1/2 5
43-H07S-SPM060 91.53 43-H07S-SSM060 102.65 3/4" x 3/4" 60 254 0.010 1-25 11-1/2 5
43-H07S-SPM100 91.53 43-H07S-SSM100 105.75 3/4" x 3/4" 100 152 0.006 1-25 11-1/2 5
43-H07S-SPM140 91.53 43-H07S-SSM140 107.03 3/4" x 3/4" 140 104 0.004 1-25 11-1/2 5
43-H07S-SSM200 109.20 3/4" x 3/4" 200 74 0.0029 1-25 11-1/2 5
43-H07S-SPM250 94.97 3/4" x 3/4" 250 61 0.0024 1-25 11-1/2 5
43-H07S-SPM500 94.97 3/4" x 3/4" 500 30 0.0012 1-25 11-1/2 5
43-H07S-SPM1000 94.97 3/4" x 3/4" 1000 15 0.006 1-25 11-1/2 5
US Rev. 4.1