Brochure
HOT WATER/CHEMICAL RESISTANT SEDIMENT FILTERS
Specially designed to remove large volumes of sediment from hot water and a wide range
of chemicals on systems with ow rates up to 25 GPM. These spin-out lters are available in
two models “standard” and "separator" (extended bowl) housings. The extended lter bowl
provides greater sediment holding capacity than the standard housing. The separation of
the ltrate from the lter element compartment greatly reduces the abrasion on the lter
element increasing its life span. These lters are ideal for a multitude of applications in
agricultural, commercial and industrial elds.
STAINLESS STEEL & POLYESTER MESH FILTERS
■
For "T" and combo lters
■
Available in a wide range of mesh from 24 -1000
■
Polyester and 316 stainless steel
FILTERS & SEPARATORS
■
Max. Operating Pressure: 150 PSI (1034 kPa)
■
Max. Operating Temperature: 100°F (38°C)
■
Purge Valve and PTFE Tape included with housing
■
Water Use Only
"T" STANDARD FILTER HOUSINGS AND COMPLETE UNITS
■
Available in 3/4" FPT, 1", 1-1/2" & 2" Slip - Inlet/Outlet connections
■
180 degree in-line "T" style installation
■
Increased effective screen area
IN-LINE "T" SAND SEPARATORS (has all the same features as "T" Style Screen Filters)
"Spin-out" action separates heavier than water particles away from screen into the
collection chamber. The 3/4" & 1" models utilize a special extended bowl to create the
collection chamber, the 1-1/2" & 2" models use the same lter bowl as the standard
lters with a specially designed separator lter element which leaves the bottom half of
the lter bowl open to provide a larger capacity collection chamber.
■
The separation of the ltrate from the lter element compartment greatly reduces the
abrasion on the lter element increasing its life span
COMBO FILTER HOUSINGS
■
Available in 1-1/2" & 2" Slip - Inlet / Outlet connections
■
Versatile 90 degree "L" or 180 degree in-line "T" installation. Each lter includes one slip
bushing with a 1-1/4" threaded plug to close off the outlet which is not required while
leaving and optional 1-1/4" outlet that can be utilized as a second outlet at a later
time
COMBO SAND SEPARATORS (has all the same features as Combo Style Screen Filters)
"Spin-out" action separates heavier than water particles away from screen into the
collection chamber. Both the 1-1/2" and 2" use the same lter bowl as the standard
lters with a specially designed separator lter element which leaves the bottom half of
the lter bowl open to provide a larger capacity collection chamber.
■
The separation of the ltrate from the lter element compartment greatly reduces the
abrasion on the lter element increasing its life span
WARNING: HAND TIGHTEN ONLY - USE OF TOOLS VOIDS WARRANTY