Brochure

SEDIMENT CARTRIDGES
Micron Rating 1-50
Standard & Giant Sizes Available
10" or 20" Nominal Lengths
PLEATED POLYESTER CARTRIDGES
The pleated polyester lters are suited for a variety of uses and can be used in residential,
commercial and industrial applications. The non-woven polyester lter media is pleated
around a polypropylene core for added strength and stability. The pleated surface area
provides greater sediment and dirt holding capacity while maintaining ow rate and
reducing initial pressure drop.
Washable & Reusable
SPUN POLYPROPYLENE GRADIENT DEPTH CARTRIDGES
Standard specication meets most of the housings in the market. General industrial Reverse
Osmosis systems, food and beverage, commercial and home Reverse Osmosis system use.
Four Layer Varied Micron Rating for extended life
NSF/ANSI Standard 42
STRING WOUND “FDA” POLYPROPYLENE CARTRIDGE
For a wide range of ltering applications, manufactured from FDA grade polypropylene.
These cartridges are very suitable for potable water ltration. Ideal for removing very ne
sediment right through to very coarse sediment, at ambient temperatures.
NOTE: Be careful when comparing pricing - there are lower cost "INDUSTRIAL GRADE"
polypropylene cartridges being sold that are not meant for ltering potable water.
Filter media: Polypropylene
Centre core: Polypropylene
Temperature rating: 120°F (49°C)
NSF/ANSI Standard 42
300°F HIGH TEMPERATURE STRING WOUND COTTON CARTRIDGES
For ltration of liquids with temperatures up to 300°F (149°C) suitable for a wide range of
ltering applications including potable water. Suitable for removing very ne sediment right
through to very coarse sediment.
FDA approved.
Cartridges are wound with bleached cotton bres on a #304 stainless steel core.
300°F HIGH TEMPERATURE STRING WOUND NATURAL COTTON
CARTRIDGES
For ltration of liquids with temperatures up to 300°F (149°C) (when used in conjunction with
stainless steel lter housings) suitable for a wide range of ltering applications. Suitable for
removing very ne sediment right through to very coarse sediment.
Not FDA approved.
Not suitable for potable water.
Cartridges are wound with natural cotton bres on a tin core.