Operation Manual
English – 17
PERSONALIZING YOUR WAVE
®
 RADIO III
The setup menu
The setup menu allows you to customize the operation 
of the Wave
®
 radio III.
To change a system setting:
1. Press and hold Alarm Setup (Menu) 
until -SETUP MENU- is displayed.
2. Press Tune/Playlist 
> until the menu 
item you want to change is displayed.
3. Press Time – or Time + to change 
the value or selection.
4. Press Alarm Setup (Menu) to exit 
the setup menu or wait 10 seconds 
for the setup menu to exit 
automatically.
System settings were selected at the factory to satisfy most 
owners of a Wave
®
 radio III. However, if you wish to adjust the 
system settings see the instructions on the following pages.
System Setting Menu Item
Factory 
Setting
Choices Description
Snooze Duration SNOOZE- 10 MIN 10 MIN, 20 MIN, 
30 MIN, 40 MIN, 
50 MIN, 60 MIN, OFF
Determines the snooze time duration.
Radio Data System 
(RBDS) Information
RADIO TEXT- ON ON, OFF Enables (ON) or disables (OFF) the system to 
display RDS information.
Clock Time 
Format
TIME- 12 HOUR 12-HOUR, 
24-HOUR
Sets the clock display for 12-hour (AM/PM) or 
24-hour time.
Display High 
Brightness Level
BRIGHT HI- 10 8-15 Sets the display brightness level when the unit 
detects high ambient light conditions.
Display Low 
Brightness Level
BRIGHT LO- 4 1-8 Sets the display brightness level when the unit 
detects low ambient light conditions.
Room Code ROOM- B 
_ _ _ – B _ _ _ –, C _ _ – _,
D _ _ – –, E _ – _ _,
F _ – _ –, G _ – – _,
H _ – – –, I – _ _ _,
J – _ _ –, K – _ – _,
L – _ – –, M – – _ _,
N – – _ –, O – – – _
Sets the room code for your Wave
®
 radio III when 
it is connected to your Lifestyle
®
 system through a 
Bose
®
 link network.
The dashes following the room letter indicate how 
the microswitches should be set on the Lifestyle
®
remote control.
Capacitive touch 
control
TOUCH PAD- ON ON, OFF Enables (ON) or disables (OFF) the touch pad.
30 min. system 
standby timer
AUTO OFF- YES YES, NO Enables (YES) or disables (NO) the 30-minute 
system standby timeout. Refer to “Turning the 
Wave® radio III on and off” on page 9.
System Reset RESET ALL- NO NO, YES Restores the Wave
®
 radio III to factory 
settings.
Seine_SRD_OG.book Page 17 Wednesday, November 2, 2011 12:06 PM










