Installation guide

Installation Procedure

Installing the Wave/PC

system USB adapter cable

The Wave/PC™ system USB adapter cable includes a connector for the

USB port of your computer and a mini-stereo plug for your sound card

output (Figure 2). Connecting both cords to your computer is standard.

However, you have the option of receiving digital audio and bypassing

your computer’s sound card. Be sure to read the “Audio Settings” on

page 9.

Figure 2

USB adapter

connections

1. If your Wave/PC™ system was previously installed, remove the orig-

inal Wave/PC™ system cable connecting the Wave/PC™ unit to

your computer.

2. Plug the DIN connector of the USB adapter into the DIN socket on

the rear of the Wave/PC™ unit.

3. Plug the mini-stereo plug into the audio output of your computer’s

sound card.

4. Plug the USB connector into your computer’s USB port.This action

launches the Windows “Add New Hardware Wizard.” Completing

this installation from this point depends on what operating system

your computer is using:

For Windows 98SE systems

, see “Adding new hardware to Win-

dows 98SE systems” on page 6.

For Windows ME systems

, see “Adding new hardware to Windows

ME systems” on page 8.

For Windows 2000 systems

, see “Adding new hardware to Win-

dows 2000 systems” on page 8.

Sound card output USB port

DIN socket

Wave/PC

unit

Computer